ULTRA LOW VIBRATION SHUTTER
WITH A MOUNTING PLATE
SH-35-M
LOW COST OPTICAL SHUTTER/ LOW FREQUENCY CHOPPER
FEATURES AND ADVANTAGES:
*Aperture size: 0.35" (9mm) dia.
*No clicking or knocking noise (no hard stop)
*Does not create shock and vibration
*Response time: 5 mSec
*Can be used as a low frequency chopper
*Frequency response: DC to 50 Hz
*Can be stopped in the OPEN or CLOSE position
*Long life: 100 million cycles min.
*Jitter free operation
*Dark blade, bright optional
*LOW COST
*Simple to operate
*Extremely small size
*Easy to integrate into OEM products.
* Special pricing for OEM applications.
DESCRIPTION:
The low cost small size mechanical light shutter /chopper model SH-35 is an ULTRA-LOW VIBRATION device that does not create shock or vibrations. It is useful when working on an optical table and is suitable to be part of an instrument or a system where a vibration free environment is needed. The shutter / chopper is easy to operate and is valuable when integrated into an OEM product. It is very cost effective in high volume.
The device consists of a 0.010" thick aluminum black anodized blade mounted on a motor with a limited rotation angle to fit a 0.35” (9mm) aperture. The blade is also available in a bright nickel plating finish. Other thicknesses and finishing types are available. The total swing of the blade from one end position to the other end position is 30 degrees. Transition from one position to the other is 5mSec total. Transition is smooth, no clicking noise, no hard stops, and with minimal shock or vibration.
The shutter can also be used as a low frequency optical chopper at frequencies from DC to 50Hz.
We offer the following models (custom and standard) for the SH-35 shutter:
SH-35 shutter is mounted on a base with a front plate that allows horizontal and vertical mounting
SH-35-M shutter comes without a mounting plate and allows horizontal and vertical mounting.
SH-35-S shutter is mounted with standoffs only
SPECIFICATIONS (When used with the DSH-35 Driver):
APERTURE SIZE: 0.35" (9mm) dia.
FREQUENCY RANGE: DC to 50Hz
RESPONSE TIME: 5 mSec, from an OPEN position to a CLOSE position, or vice-versa
FREQUENCY STABILITY: 0.1% internal clock; 0.005% with external crystal clock input (TTL input)
EXTERNAL INPUT: DC to 50Hz TTL level input; 5V or "OPEN" to open the shutter; 0V or "GND" to close the shutter
SETTLING TIME TO EXTERNAL TTL INPUT: 5 mSec
MONITOR OUTPUT: TTL level output:
"Hi" indicates that the shutter is open
"Lo" indicates that the shutter is close
OPERATING TEMPERATURE: 0-65 deg CDSH-35 DRIVER:
The DSH-35 driver is designed specially to control the model SH-35 shutter/chopper.
It has two modes of operation:
In the "internal" mode the SH-35 is used as an optical chopper. The chopping frequency is set by the internal oscillator and is adjustable from 0.5Hz to 50Hz.
In the "external" mode the SH-35 can be used as an optical shutter or as a chopper. A TTL input controls the blade position of the SH-35.
A "High" TTL input (5V) keeps the shutter open.
A "Low" TTL input (0V) keeps the shutter close.
The response time of the shutter to the TTL input is 5mSec. The maximum TTL input frequency is 50Hz.
ORDERING INFORMATION: Example: PART NO. SH35-M w/ DSH-35-110-BNC
商品属性 [频率] DC to 50 Hz