Model PB-5
Precision Pulse Generator
The PB-5 sets a new standard for precision pulse generators. It offers full digital controllability with a built-in ramp generator for linearity testing. It provides tail and flat top pulses with outstanding integral linearity and extremely low amplitude change with temperature. The PB-5 is capable of testing the stability, linearity, and resolution of the most demanding spectroscopy circuits and instrumentation. It is the successor to the industry standard, PB-4 pulse generator.
Main Menu
The 4x16 LCD display, keypad, and a spinner knob provide a user interface that is easy to use. RS232 interface is also standard along with memory that will store and recall nine complete pulse setups.
Pulse Settings
The pulse repetition rates, which are variable over a broad range, go up to 0.5 MHz. The higher rates are required when testing for MCA and PHA linearity because of the high number of data points required for a statistically valid test.
Trigger Mode
The Model PB-5 pulse generator provides unprecedented performance in a precision pulse generator. It includes a full-featured, highly flexible ramp generator and programmability. As a precision pulse generator, the PB-5 surpasses or equals all existing designs in the important performance areas of resolution, linearity, and stability.
Ramp Settings
The built-in ramp generator allows you to control ramp duration, the number of ramps, and the ramp limits. Now you can test the entire range of your system or just a portion of that range. This ramp generator and precision pulse generator combination allows you to tackle the most demanding applications.
OVERVIEW
APPLICATIONS
Multi-Channel Analyzer Testing
Nuclear Circuit Testing
Pulse Height Analyzer Calibration
Pile-Up and Saturation Tests
Risetime and Bandwith Characterization
NIM Module System Integration
Radiation Detector Testing
Temperature Stability +/-5ppm (world's best)
Pulse Types: Flat Top, Tail Pulse
Remote: RS-232, Labview Support
Rise Time: Adjustable
Fall Time (Decay): Adjustable
Amplitude Resolution: 155uV steps
FEATURES
Excellent linearity, stability, and resolution
Built-in Ramp Generator
Digital and programmable
Fast automated testing
SPECIFICATIONS
Rep Rate:
2.0 Hz to 500 kHz
Width:
100 ns to 1 ms
Delay:
250 ns to 10 ms
Rise Time:
50 ns to 10 us (10 % - 90 %) in 8 steps
Decay Time:
0.5 us to 1.0 ms (100 % - 37 %) in 11 steps
Amplitude
0.0 to 10.0 V (0 to 5 V into 50 ohms)
Scaleable in energy units. (kev)
Resolution:
155 uV
Jitter:
± 10 ppm
Attenuation:
1, 2, 5, 10, 20, 50, 100, 200, 500, 1000
Integral non-linearity:
± 15 ppm
Temperature stability:
± 5 ppm per ºC from 20ºC to 45ºC
Pulse Type:
Flat-top or Tail pulse - In tail mode, rise time is a fixed 50 ns, decay time is adjustable. In flat-top mode,
both rise time and decay time are adjustable.
Polarity:
Positive/Negative
Ext. Trigger:
0 to 500 kHz, +100 mV to +3.5 v, threshold adjustable.
Width:
100 ns to 1 ms
Modes:
Single pulse via a front panel pushbutton;
Internal Rep Rate;
External Trigger;
External Gate with the same pulse requirements as Ext Trig;
Internal Ramp-adjustable start and stop points; adjustable ramp period 30-900 s, selectable number of ramp cycles,
ramp in keV or volts. Clamped baseline option to bring the baseline to zero prior to the next pulse.
Stored Settings:
Up to 9 complete configurations with recall. Also stores parameters in use at shutdown for automatic recall when powered on.
Remote:
RS232 at 9600 baud, User Customized or LabView Drivers.
Power Required:
+24V , 170 ma
-24V , 150 ma
+12V , 450 ma
-12V , 5 ma
Portable power supply available for applications that require portability or benchtop use. See BNC Model AP-3
Portable NIM Power Supply.
Mechanical:
Triple-witdh AEC NIM module 4.05" wide x 8.70" high in accordance with TID-20893 ( Rev 3. ).
Weight:
2 lbs. 13 oz. net, 6 lbs shipping.
描述 [描述] 提供全数字可控性与内置坡道发电机线性测试。