DE-R 229 Diffractive Optical Element
• Element Number: DE-R 229
• Current Product Revision: A
• Description: 1 : 36 Dot Circle
• Number of Dots: 36 + 1 Dots
• Substrate material: Polycarbonate (PC)
• Size (Ø x Thickness): 8 x 1.2 mm
• Design wavelengths: 532 nm
• Recommended wavelength range: 480-560 nm
• Minimum recommended beam diameter: 1-1.5 mm
Pattern size and pattern angles and the intensity in the undiffracted central spot ('zero order intensity', see reverse page) will vary most with the wavelength. At the optimum wavelength given on this datasheet, the element shows the lowest intensity in the central spot.
Diffraction efficiencies given on this datasheet have been measured using elements of product revision A.
Geometry and Diffraction Angles
Wavelength
Pattern Size @ 100 mm Distance
Pattern Angles
a
b
α
β
405 nm
4.7 mm
0.4 mm
2.7 °
0.23 °
450 nm
5.2 mm
0.5 mm
3.0 °
0.26 °
488 nm
5.6 mm
0.5 mm
3.2 °
0.28 °
515 nm
5.9 mm
0.5 mm
3.4 °
0.30 °
532 nm
6.1 mm
0.5 mm
3.5 °
0.31 °
635 nm
7.3 mm
0.6 mm
4.2 °
0.37 °
650 nm
7.5 mm
0.7 mm
4.3 °
0.38 °
730 nm
8.4 mm
0.7 mm
4.8 °
0.42 °
Setup
Laser diodes are the most common light source to be used with diffractive optical elements, but other laser light sources may also be used.
The DOEs are best used with collimated or convergent laser sources. The microstructure surface should be oriented towards the laser.
The 0-order spot is equivalent in size and shape to the original beam, but its power is attenuated.
Diffraction Zero Order Intensity:
Wavelength
0-Order
Intensity
447
7.95%
488
1.51%
515
0.14%
532
0.12%
594
3.21%
638
7.58%
654
8.58%
687
12.23%
描述 [描述] Design wavelengths: 532 nm