X-LRT-AEC Series: High-load, high accuracy linear stages with built-in controllers, linear encoders, and dust covers
100, 250, 500, 750, 1000 mm travel
20 µm full travel accuracy
300 kg load capacity
Includes stainless steel dust covers
Ball screw and lead screw configurations
Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
Built-in controller; daisy-chains with other Zaber products
Zaber's X-LRT-AEC Series are computer-controlled, motorized linear stages designed for positioning high loads to within 20 µm accuracy. An integrated linear encoder combined with stage calibration provides high accuracy positioning over the full travel of the device. They have low pitch, roll, yaw and runout and long lifetime. Flexible dust covers keep out moderate debris. An indexed knob provides convenient manual control for versatile operation even without a computer.
X-LRT-AEC devices are stand-alone units requiring only a standard 48 V power supply. They connect to the RS-232 port or USB port of any computer, and can be daisy-chained with any other Zaber products. Like all of Zaber's products, the X-LRT-AEC Series is designed to be 'plug and play' and very easy to set up and operate.
Zaber's positioners with built-in controllers, stand-alone controllers, and joysticks are divided into three series: the T-Series, the A-Series, and the X-Series. Please refer to our Series Reference Table for more information.
Part Numbering Scheme
Specification Value Alternate Unit Built-in Controller
Yes
Accuracy (unidirectional)
20 µm
0.000787 "
Backlash
< 15 µm
< 0.000591 "
Encoder Type
Linear analog encoder
Communication Interface
RS-232
Communication Protocol
Zaber ASCII (Default)
Maximum Centered Load
2940 N
659.3 lb
Maximum Cantilever Load
80 N⋅m
59.0 ft⋅lb
Guide Type
Recirculating Ball Linear Guide
Vertical Runout
< 10 µm
< 0.000394 "
Horizontal Runout
< 18 µm
< 0.000709 "
Pitch
0.014 °
0.244 mrad
Roll
0.01 °
0.174 mrad
Yaw
0.018 °
0.314 mrad
Stiffness in Pitch
1400 N⋅m/°
12 µrad/N⋅m
Stiffness in Roll
700 N⋅m/°
25 µrad/N⋅m
Stiffness in Yaw
1200 N⋅m/°
15 µrad/N⋅m
Maximum Current Draw
3600 mA
Power Supply
24-48 VDC
Power Plug
2-pin screw terminal
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Motor Rated Current
4200 mA/phase
Inductance
2 mH/phase
Default Resolution
1/64 of a step
Data Cable Connection
Locking 4-pin M8
Limit or Home Sensing
Linear Encoder Index Mark
Manual Control
Indexed knob with push switch
Axes of Motion
1
LED Indicators
Yes
Operating Temperature Range
0 to 50 °C
Vacuum Compatible
No
RoHS Compliant
Yes
CE Compliant
Yes
Comparison - X-LRT-AEC Series
Part Number Microstep Size (Default Resolution) Travel Range Repeatability Maximum Speed X-LRT0100AL-AE53C
0.124023438 µm
100 mm (3.937 ")
< 1 µm (< 0.000039 ")
45 mm/s (1.772 "/s)
X-LRT0100BL-AE53C
0.49609375 µm
100 mm (3.937 ")
< 1.5 µm (< 0.000059 ")
181 mm/s (7.126 "/s)
X-LRT0100DL-AE53C
1.984375 µm
100 mm (3.937 ")
< 1.5 µm (< 0.000059 ")
726 mm/s (28.583 "/s)
X-LRT0100HL-AE53C
0.390625 µm
100 mm (3.937 ")
< 1.5 µm (< 0.000059 ")
143 mm/s (5.630 "/s)
X-LRT0250AL-AE53C
0.124023438 µm
250 mm (9.843 ")
< 1 µm (< 0.000039 ")
45 mm/s (1.772 "/s)
X-LRT0250BL-AE53C
0.49609375 µm
250 mm (9.843 ")
< 1.5 µm (< 0.000059 ")
181 mm/s (7.126 "/s)
X-LRT0250DL-AE53C
1.984375 µm
250 mm (9.843 ")
< 1.5 µm (< 0.000059 ")
726 mm/s (28.583 "/s)
X-LRT0250HL-AE53C
0.390625 µm
250 mm (9.843 ")
< 1.5 µm (< 0.000059 ")
143 mm/s (5.630 "/s)
X-LRT0500AL-AE53C
0.124023438 µm
500 mm (19.685 ")
< 1 µm (< 0.000039 ")
45 mm/s (1.772 "/s)
X-LRT0500BL-AE53C
0.49609375 µm
500 mm (19.685 ")
< 1.5 µm (< 0.000059 ")
181 mm/s (7.126 "/s)
X-LRT0500DL-AE53C
1.984375 µm
500 mm (19.685 ")
< 1.5 µm (< 0.000059 ")
726 mm/s (28.583 "/s)
X-LRT0500HL-AE53C
0.390625 µm
500 mm (19.685 ")
< 1.5 µm (< 0.000059 ")
143 mm/s (5.630 "/s)
X-LRT0750AL-AE53C
0.124023438 µm
750 mm (29.528 ")
< 1 µm (< 0.000039 ")
45 mm/s (1.772 "/s)
X-LRT0750BL-AE53C
0.49609375 µm
750 mm (29.528 ")
< 1.5 µm (< 0.000059 ")
181 mm/s (7.126 "/s)
X-LRT0750DL-AE53C
1.984375 µm
750 mm (29.528 ")
< 1.5 µm (< 0.000059 ")
726 mm/s (28.583 "/s)
X-LRT0750HL-AE53C
0.390625 µm
750 mm (29.528 ")
< 1.5 µm (< 0.000059 ")
143 mm/s (5.630 "/s)
X-LRT1000AL-AE53C
0.124023438 µm
1000 mm (39.370 ")
< 1 µm (< 0.000039 ")
38 mm/s (1.496 "/s)
X-LRT1000BL-AE53C
0.49609375 µm
1000 mm (39.370 ")
< 1.5 µm (< 0.000059 ")
140 mm/s (5.512 "/s)
X-LRT1000DL-AE53C
1.984375 µm
1000 mm (39.370 ")
< 1.5 µm (< 0.000059 ")
573 mm/s (22.559 "/s)
X-LRT1000HL-AE53C
0.390625 µm
1000 mm (39.370 ")
< 1.5 µm (< 0.000059 ")
110 mm/s (4.331 "/s)
Part Number Minimum Speed Speed Resolution Peak Thrust Back-driving Force X-LRT0100AL-AE53C
0.000076 mm/s (0.000003 "/s)
0.000076 mm/s (0.000003 "/s)
1200 N (269.1 lb)
Non-back-driving
X-LRT0100BL-AE53C
0.000303 mm/s (0.000012 "/s)
0.000303 mm/s (0.000012 "/s)
600 N (134.6 lb)
420 N (94.2 lb)
(± 30%)X-LRT0100DL-AE53C
0.001212 mm/s (0.000048 "/s)
0.001212 mm/s (0.000048 "/s)
100 N (22.4 lb)
40 N (9.0 lb)
(± 30%)X-LRT0100HL-AE53C
0.000239 mm/s (0.000009 "/s)
0.000239 mm/s (0.000009 "/s)
1200 N (269.1 lb)
157 N (35.2 lb)
(± 30%)X-LRT0250AL-AE53C
0.000076 mm/s (0.000003 "/s)
0.000076 mm/s (0.000003 "/s)
1200 N (269.1 lb)
Non-back-driving
X-LRT0250BL-AE53C
0.000303 mm/s (0.000012 "/s)
0.000303 mm/s (0.000012 "/s)
600 N (134.6 lb)
420 N (94.2 lb)
(± 30%)X-LRT0250DL-AE53C
0.001212 mm/s (0.000048 "/s)
0.001212 mm/s (0.000048 "/s)
100 N (22.4 lb)
40 N (9.0 lb)
(± 30%)X-LRT0250HL-AE53C
0.000239 mm/s (0.000009 "/s)
0.000239 mm/s (0.000009 "/s)
1200 N (269.1 lb)
157 N (35.2 lb)
(± 30%)X-LRT0500AL-AE53C
0.000076 mm/s (0.000003 "/s)
0.000076 mm/s (0.000003 "/s)
1200 N (269.1 lb)
Non-back-driving
X-LRT0500BL-AE53C
0.000303 mm/s (0.000012 "/s)
0.000303 mm/s (0.000012 "/s)
600 N (134.6 lb)
420 N (94.2 lb)
(± 30%)X-LRT0500DL-AE53C
0.001212 mm/s (0.000048 "/s)
0.001212 mm/s (0.000048 "/s)
100 N (22.4 lb)
40 N (9.0 lb)
(± 30%)X-LRT0500HL-AE53C
0.000239 mm/s (0.000009 "/s)
0.000239 mm/s (0.000009 "/s)
1200 N (269.1 lb)
157 N (35.2 lb)
(± 30%)X-LRT0750AL-AE53C
0.000076 mm/s (0.000003 "/s)
0.000076 mm/s (0.000003 "/s)
1200 N (269.1 lb)
Non-back-driving
X-LRT0750BL-AE53C
0.000303 mm/s (0.000012 "/s)
0.000303 mm/s (0.000012 "/s)
600 N (134.6 lb)
420 N (94.2 lb)
(± 30%)X-LRT0750DL-AE53C
0.001212 mm/s (0.000048 "/s)
0.001212 mm/s (0.000048 "/s)
100 N (22.4 lb)
40 N (9.0 lb)
(± 30%)X-LRT0750HL-AE53C
0.000239 mm/s (0.000009 "/s)
0.000239 mm/s (0.000009 "/s)
1200 N (269.1 lb)
157 N (35.2 lb)
(± 30%)X-LRT1000AL-AE53C
0.000076 mm/s (0.000003 "/s)
0.000076 mm/s (0.000003 "/s)
1200 N (269.1 lb)
Non-back-driving
X-LRT1000BL-AE53C
0.000303 mm/s (0.000012 "/s)
0.000303 mm/s (0.000012 "/s)
600 N (134.6 lb)
420 N (94.2 lb)
(± 30%)X-LRT1000DL-AE53C
0.001212 mm/s (0.000048 "/s)
0.001212 mm/s (0.000048 "/s)
100 N (22.4 lb)
40 N (9.0 lb)
(± 30%)X-LRT1000HL-AE53C
0.000239 mm/s (0.000009 "/s)
0.000239 mm/s (0.000009 "/s)
1200 N (269.1 lb)
157 N (35.2 lb)
(± 30%)
Part Number Maximum Continuous Thrust Linear Motion Per Motor Rev Mechanical Drive System Weight X-LRT0100AL-AE53C
668 N (149.8 lb)
1.5875 mm (0.062 ")
Precision lead screw
3.65 kg (8.047 lb)
X-LRT0100BL-AE53C
600 N (134.6 lb)
6.35 mm (0.250 ")
Precision lead screw
3.65 kg (8.047 lb)
X-LRT0100DL-AE53C
100 N (22.4 lb)
25.4 mm (1.000 ")
Precision lead screw
3.65 kg (8.047 lb)
X-LRT0100HL-AE53C
1200 N (269.1 lb)
5 mm (0.197 ")
Precision ball screw
3.65 kg (8.047 lb)
X-LRT0250AL-AE53C
668 N (149.8 lb)
1.5875 mm (0.062 ")
Precision lead screw
4.441 kg (9.791 lb)
X-LRT0250BL-AE53C
600 N (134.6 lb)
6.35 mm (0.250 ")
Precision lead screw
4.441 kg (9.791 lb)
X-LRT0250DL-AE53C
100 N (22.4 lb)
25.4 mm (1.000 ")
Precision lead screw
4.441 kg (9.791 lb)
X-LRT0250HL-AE53C
1200 N (269.1 lb)
5 mm (0.197 ")
Precision ball screw
4.441 kg (9.791 lb)
X-LRT0500AL-AE53C
668 N (149.8 lb)
1.5875 mm (0.062 ")
Precision lead screw
5.758 kg (12.694 lb)
X-LRT0500BL-AE53C
600 N (134.6 lb)
6.35 mm (0.250 ")
Precision lead screw
5.758 kg (12.694 lb)
X-LRT0500DL-AE53C
100 N (22.4 lb)
25.4 mm (1.000 ")
Precision lead screw
5.758 kg (12.694 lb)
X-LRT0500HL-AE53C
1200 N (269.1 lb)
5 mm (0.197 ")
Precision ball screw
5.758 kg (12.694 lb)
X-LRT0750AL-AE53C
668 N (149.8 lb)
1.5875 mm (0.062 ")
Precision lead screw
7.076 kg (15.600 lb)
X-LRT0750BL-AE53C
600 N (134.6 lb)
6.35 mm (0.250 ")
Precision lead screw
7.076 kg (15.600 lb)
X-LRT0750DL-AE53C
100 N (22.4 lb)
25.4 mm (1.000 ")
Precision lead screw
7.076 kg (15.600 lb)
X-LRT0750HL-AE53C
1200 N (269.1 lb)
5 mm (0.197 ")
Precision ball screw
7.076 kg (15.600 lb)
X-LRT1000AL-AE53C
668 N (149.8 lb)
1.5875 mm (0.062 ")
Precision lead screw
8.393 kg (18.503 lb)
X-LRT1000BL-AE53C
600 N (134.6 lb)
6.35 mm (0.250 ")
Precision lead screw
8.393 kg (18.503 lb)
X-LRT1000DL-AE53C
100 N (22.4 lb)
25.4 mm (1.000 ")
Precision lead screw
8.393 kg (18.503 lb)
X-LRT1000HL-AE53C
1200 N (269.1 lb)
5 mm (0.197 ")
Precision ball screw
8.393 kg (18.503 lb)
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
商品属性 [行程] 100, 250, 500, 750, 1000 mm [负载] 300 kg [分辨率] 20 µm