High Power Single-Frequency MOPAs
(Master Oscillator Power Amplifiers)
Innovative Photonic Solutions introduces our Master Oscillator Power Amplifier (MOPA) that offers single‐frequency and high power output. We take our proprietary wavelength stabilization technique a step further and amplify the very stable narrow linewidth output allowing our customers to have the best of both worlds.
We offer an internally PM fiber coupled MOPA with >300 mW single‐ frequency output power. Unlike other MOPAs that utilize external fiber alignment fixtures and require alignment each time environmental changes occur, IPS’s MOPA is permanently affixed and needs no adjustment. For users that need open beam output, we offer an open beam MOPA with >500 mW single frequency output. Both versions of our MOPA are power adjustable and come fully “turn‐key” in UL/CE and IEC certified modules with high performance laser drive and temperature controls and all safety features.
With high power and single‐frequency, IPS’s MOPAs are ideal for Raman Imaging & Microscopy, laser trapping & cooling, and applications that require a highly coherent light source like Speckle Imaging.
Standard Wavelengths
• 760 nm • 780 nm • 785 nm
Additional wavelengths available upon request
Single‐Frequency Internally PM Fiber Coupled MOPA
• Wavelength Stabilized Spectrum
• > 300 mW PM Fiber Coupled output power
• TEM00 with M2< 1.05
• UL/CE and IEC Certified
• Turn‐Key Operation
• User adjustable output power
• Narrow Spectral Linewidth
• >40 dB SMSR Typical
Single‐Frequency Open Beam MOPA
• Wavelength Stabilized Spectrum
• Circularized, astigmatism‐free beam
• > 500 mW Open Beam Output
• 1W Open Beam Output upon request
• UL/CE and IEC Certified
• Turn‐Key Operation
• User adjustable output power from 0 to 100%
• Narrow Spectral Linewidth
• >40 dB SMSR Typical
• >50 dB SMSR with laser line filter
PM Fiber Coupled Single-Frequency MOPA
The Innovative Photonic Solutions (IPS) Master Oscillator Power Amplifier (MOPA) provides a powerful and extremely stable wavelength stabilized laser source that is ideal for scientific applications including Raman Spectroscopy, Raman microscopy and imaging, and Illumination.
IPS’s fiber coupled MOPA is internally PM fiber coupled which provides TEM00 output with M2 < 1.05 and >300 mW output power.
Wavelength (nm)
Min. Power (mW)
Part Number
760
300
I0760SM0300PA-MOPA
780
I0780SM0300PA-MOPA
785
I0785SM0300PA-MOPA
Physical Specifications
Optical Fiber
Polarization Maintaining (PM), Panda
Type
Connector
FC/APC
Module Dimensions
9.48 x 6.94 x 4.14 inches
Module weight
60 ounces
Case Material
Anodized Aluminmum
Operating Temperature
10 to 35 degrees C
Environment
0-80% Humidity, non condensing
Storage Temperature
-10 to + 55 degress C
Operational Notes
1. Do not retro‐reflect beam! This can cause Catastrophic Optical Damage (COD) and is not covered under warranty.
2. Knob on front adjusts power by adjusting drive current. LED readout is in amperes.
3. See Operation Manual for full operating and safety instructions. This document is meant to offer a product overview.
General Optical Specifications
Wavelength Tolerance
+/- 0.5 nm
Spectral Linewidth (Dl)
< 100 MHz typical
SMSR
35 -45 dB
Output Power Stability
< 3% short term (over seconds)
< 10% typical long term
Output Power Adjustability
zero to full power
Beam Diameter
~ 4um at exit of fiber
Fiber Type
Corning PM850, Panda-style PM
fiber, NA ~0.1
Peak Wavelength Drift
+/- 0.07 nm
Modulation Rate
10 kHz
Warm-up time
10 seconds from cold start
1.5 seconds from warm start
Electrical Requirements
Input Power
100 – 240 VAC,
50 – 60 Hz, 0.4 A
Fuse Rating
250 V, 3.14 A, Slow Blow,
5 mm x 20 mm, 2 each
Mechanical Specifications – PM Fiber Coupled MOPA
Open Beam Single-Frequency MOPA
The Innovative Photonic Solutions (IPS) Master Oscillator Power Amplifier (MOPA) provides a powerful and extremely stable wavelength stabilized laser source that is ideal for scientific applications including Raman Spectroscopy and Illumination.
The Open beam MOPA offers TEM00 output with M2< 1.7 (in center lobe) and >500 mW output power.
Up to 1W available upon request.
Wavelength (nm)
Min. Power (mW)
Part Number
760
500*
I0760SR0500B-MOPA
780
I0780SR0500B-MOPA
785
I0785SR0500B-MOPA
Physical Specifications
Module Dimensions
229 x 175 x 113 mm
Module weight
100 ounces
Case Material
Anodized Aluminmum
Operating Temperature
10 to 35 degrees C
Environment
0-80% Humidity, non condensing
Storage Temperature
-10 to + 55 degress C
Operational Notes
1. Do not retro‐reflect beam! This can cause Catastrophic Optical Damage (COD) and is not covered under warranty.
2. Knob on rear panel adjusts power by adjusting drive current.
3. See Operation Manual for full operating and safety instructions. This document is meant to offer a product overview.
General Optical Specifications
Wavelength Tolerance
+/- 0.5 nm
Spectral Linewidth (Dl)
< 100 MHz typical
SMSR
35 -45 dB
Output Power Stability
< 3% short term (over seconds)
< 10% long term
Output Power Adjustability
zero to full power
Beam Diameter
~0.5 mm at exit
Divergence
~ 3 mrad
Peak Wavelength Drift
+/- 0.07nm
Modulation
10 kHz
Warm-up time
10 seconds from cold start
1.5 seconds from warm start
Electrical Requirements
Input Power
100 – 240 VAC,
50 – 60 Hz, 0.4 A
Fuse Rating
250 V, 3.14 A, Slow Blow,
5 mm x 20 mm, 2 each
Mechanical Specifications – Open Beam MOPA
* Up to 1W open beam output power available upon request
描述 [描述] Master Oscillator Power Amplifier (MOPA) that offers single‐frequency and high power output.