POCKELS CELL DRIVERS FOR UP TO 6 MHZ REPETITION RATE (≤6 MHZ, ≤3.1 KV)
2DP/DPB3 series Pockels cell drivers feature HV pulse amplitude up to 3.1 kV and HV pulse repetition rate up to 6 MHz. Drivers with HV pulse duration as short as few nanoseconds are available.
2DP/DPB3 series Pockels cell drivers can operate with highest possible repetition rates among all the Pockels cells drivers offered by EKSMA Optics. These drivers can be used for a single pulse selection in the pulse picker applications for high repetition rate lasers.
Features:
HV pulse amplitude up to 3.1 kV
Repetition rate up to 6 MHz
HV pulse duration down to <1 ns
HV pulse duration extension using pulse regeneration technique
2DP-1000-2.4-Al
2DP-2000-1.6-Al
DPB3-2000-3.4-Al
DPB3-2500-3.1-Al
Maximal HV operating voltage
2.4 kV
1.6 kV
3.4 kV
3.1 kV
Maximal HV repetition rate
1 MHz
2 MHz
2 MHz
2.5 MHz
Pulse duration
0 - 5000 ns
100 - 5000 ns
HV pulse rise time, typical
<6.5 ns
<6 ns
<10 ns
<9.5 ns
HV pulse fall time, typical
<6.5 ns
<6 ns
<10 ns
<9.5 ns
Output polarity
Positive
Bipolar
HV power consumption
<180 W
<130 W
<360 W
<180 W
12V / 24V power consumption
<14 W
<18 W
<6 W
<10 W
Cooling
Water
DPB3-3000-2.6-Al
2DPB3-4000-1.7-Al
2DPB3-6000-1.3-Al
Maximal HV operating voltage
2.6 kV
1.7 kV
1.3 kV
Maximal HV repetition rate
3 MHz
4 MHz
6 MHz
Pulse duration
100 - 5000 ns
0 - 5000 ns
HV pulse rise time, typical
<8.5 ns
<10.5 ns
<9 ns
HV pulse fall time, typical
<8.5 ns
<10.5 ns
<9 ns
Output polarity
Bipolar
Positive
HV power consumption
<325 W
<360 W
<350 W
12V / 24V power consumption
<10 W
<6 W
<10 W
Cooling
Water
Driver needs to be mounted on heatsink unless it is cooled by water. Driver's base plate temperature needs to be lower than 35 °C in all regimes of operation. Power consumption for 6 pF load.
Voltage or repetition rate derating is necessary if capacitance of your Pockels cell is higher. Contact vendor for details.
商品属性 [HV工作电压] 3.1 kV,max [HV重复频率] 2.5 MHz,max [脉冲持续时间] 100 - 5000 ns [输出极性] Bipolar [HV功耗] <180 W