DPB HIGH VOLTAGE POCKELS CELL DRIVER
DPB high voltage Pockels cell drivers feature HV pulse amplitude up to 9.8 kV. DPB series drivers can be easily integrated with HV power supplies.
DPB series high voltage drivers can operate with highest possible high voltage amplitudes among all the Pockels cells drivers offered by EKSMA Optics. DPB series drivers feature short HV pulse rise and fall time, as well as fast repetition rate. It is offered with power supply integrated on the top of driver's board ensuring compact design of the complete unit.
Features:
HV pulse amplitude up to 9.8 kV
HV pulse duration down to 30 ns
HV pulse amplitude doubling layout
Repetition rate up to 10 kHz
Easy integration with HV power supply
Switchable one/two trigger pulses control mode
Catalogue code
DPB-10-4.2
HVS-D2-10-4.2DPB-5-5.5
HVS-D2-5-5.5DPB-3-8.6
HVS-D2-3-8.6DPB-2.5-9.8
HVS-D2-2.5-9.8Maximum output pulse
amplitude (HV)
4.2 kV
5.5 kV
8.6 kV
9.8 kV
Output polarity
bipolar
HV pulse rise time, typical
6 ns
7 ns
10.5 ns
12 ns
HV pulse fall time, typical
6 ns
7 ns
9.5 ns
10.5 ns
HV pulse duration
30...3000 ns
35...2000 ns
Maximum HV repetition rate
10 kHz
5 kHz
3 kHz
2.5 kHz
HV pulse delay
30 ns
Requirement for external triggering pulse amplitude
3.5...5 V (50 Ω load)
Requirement for external triggering pulse rise time
≤ 10 ns
≤ 5 ns
Specifications applicable to OEM type DPB series Pockels cell driver
Control
by 1 or 2 external triggering pulses, switchable
External powering requirements:
Low voltage DC supply
15 - 25 V, 150 mA (0.5 A inrush current)
24-25 V, 150 mA
HV power supply
2.1 kV, 5 W
2.8 kV, 5 W
4.4 kV, 5 W
5.0 kV, 5 W
DC connectors
Molex Micro-Fit 3.0
Dimensions (L x W x H):
Driver board
135 x 65 x 30 mm
135 x 75 x 30 mm
Specifications applicable to encased type HVS-D2 series Pockels cell driver with HV Power supply
Control
by 1 or 2 external triggering pulses, factory preset
HV power supply(integrated)
2.1 kV, 5 W
2.8 kV, 5 W
4.4 kV, 5 W
5.0 kV, 5 W
Voltage control limits
Umax –1 kV to Umax (internal trimmer); 40% Umaxx to Umax (CAN)
Output voltage control options
Internal trimmer potentiometer or CAN interface (requires CAN-USB converter)
Mains voltage
90 to 264 V AC, 47 – 63 Hz
Dimensions (W × L × H)
80 × 120 × 225 mm
Power consumption for 6 pF load. Voltage or repetition rate derating is necessary if capacitance of your Pockels cell is higher. Contact vendor for details.
商品属性 [HV工作电压] 5.5 kV,Max [HV重复频率] 5 kHz,Max [脉冲持续时间] 30...3000 ns [输出极性] bipolar