SPECIM FX17
IMPROVE ACCURACY AND REDUCE COSTS
Specim FX17 camera is designed for industrial and laboratory use. It works in a line-scan mode, and collects hyperspectral data in the near-infrared NIR region (900 to 1700 nm). Specim FX17 is best suited for:
• Food & feed quality
• Waste sorting
• Recycling
• Moisture measurement
• Threat detection, Security
FEATURES
• Spectral range of 900-1700 nm
• High spatial resolution of 640 pixels
• High image speed 527 FPS (full range) for GigE version 670 FPS (full range) for CameraLink version
• Free wavelength selection from 224 bands within the camera coverage
• Built-in image correction
• Unified spectral calibration between units
• GigE or CameraLink standard interfaces
• Easy mounting to industrial environment
SPECTRAL RESPONSE
DIMENSIONS
Spectral Range
900-1700 nm
Spectral resolution (FWHM)
8 nm (mean)
Spectral sampling/pixel
3.5 nm
Spectral bands
224
With default binning
Numerical aperture
1.7
With default lens
Optics magnification
0.80
Effective pixel size
18.7 μm
At fore lens image plane
Effective slit width
Physical width 42μm.
Projection on sensor 32 μm (M=1.3)
At fore lens image plane
Effective slit length
12.0 mm
At fore lens image plane
SNR @ max. signal
1000:1
Bit depth
12
Maximum frame rate
670 (FX17)
527 (FX17e) FPS full range
Binning
1,2,4 spectral and spatial
Default: 2 spectral x 1 spatial
ROI
Freely selectable multiple bands of interest
Minimum height of ROI is two 1-binned rows. Maximum frame rate is determined by total number of rows between first row of first mROI and last row of last mROI and the total number of rows included in the mMROI’s.
Pixel operability
99.5%
Allowed clusters:
Size 2-6 pixels: N/A
Size 7-12 pixels: ≤ 6
Size 13-19 pixels: ≤ 2
Size 20-35 pixels: ≤ 1
Size > 35: 0
Image corrections
Non uniformity correction
Bad pixel replacement
Automatic Image Enhancement (AIE)
One point NUC
AIE: Unified spectral calibration + corrected smile and keystone aberrations
Sensor material
InGaAs
Sensor cooling
TEC
Full well capacity
1.44 Me-
Read-out modes
IWR / ITR
Optics temperature
Passive
Default is 20 degrees Celsius
Lens mount
Custom mount
Fore lens FOV options
12 deg
38 deg (default)
53 deg
69 deg
75 deg
92 deg
Only the default lens is specifically designed for FX17. With other lens options, optical parameters may vary.
Camera digital data output/control interface
GigE Vision, CameraLink
Camera control protocols
GenICam, ASCII
Power input
12 V DC (+-10%)
Power consumption
Max 24 W
Connectors
Industrial Ethernet OR CameraLink (standard MDR 26-pin)
Power – Fischer 12pin DBPLU1031Z012|130G
IP
IP52
Dimensions (L x W x H)
150 x 75 x 85 mm
Mounting surface option on three sides. Mounting kit adds 24 mm distance on mounting side.
Weight
1.56 kg
Storage temperature
-20 ... +50 oC (non-condensing)
Operating temperature
+5 ... +40 oC (non-condensing)
Relative humidity
5% – 95% (non-condensing)
商品属性 [光谱FWHM] 8nm [光谱范围] 900-1700 nm