EXS210028-02
ELECTRO-OPTICAL PERFORMANCE (TSLED = 25°C)
Parameter
Symbol
Min
Typ
Max
Unit
Operating Current
Iop
0
200
mA
Power in SMF
Po
1
3
mW
Centre Wavelength
lc
1290
1310
1330
nm
3dB Bandwidth
35
40
nm
Spectral ripple [RB=0.1nm]
0.1
0.3
dB
ABSOLUTE MAXIMUM RATINGS
Stresses beyond the absolute maximum ratings may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameter
Symbol
Cond.
Min
Max
Unit
Forward current
IF
250
mA
Reverse voltage
VR
-2
V
Forward voltage
VF
IF,max
2
V
Storage temperature
Tstg
-40
85
°C
Operating temperature
Top
IF,max
-20
65
°C
Lead soldering temperature
260
°C
ESD
human b.m
500
V
SCREENING (EXS210028-02)
The manufactured 1300nm SLED Module is required to meet all operating conditions specified in Table 4.1, Electro-Optical Performance Specifications after being subjected to the following screening tests.
Test Item
Test Conditions
Reference
Sample
Hermetic Seal
(At TO-CAN Level)
Fine leak :
Max. leak rate 5x10-8 atm.cc/sec
Gross leak :
MIL-STD-883, Method 1014
Condition A
MIL-STD-883, Method 1014
Condition C
100 %
100 %
Temperature Cycling
-40°C to +85°C, ramp rate >= 5°C/min
20 cycles
MIL-STD-883, Method 1010
100%
PACKAGE DIMENSIONS [mm]
FIBRE AND CONNECTOR
Part
Description
SM Fibre
SMF-28, 9/125 mm
Loose tube
900 mm
Fibre pigtail length [min]
1 m
Optical connector
FC/APC (Narrow Key 2.0mm)
IMPORTANT NOTES
1. Avoid electrostatic discharges, which may destroy the SLED.
2. Never use the SLED module without heat sinking.
3. Adequate eye protection against laser radiation should be used while handling and operating the module.
4. EXALOS declines any responsibility if the device is used in applications where human life may be endangered.
5. Back reflections may influence the output power and spectral characteristics of the SLED. The use of optical isolators and/or angled connectors is recommended. Back reflections of less than -30dB are recommended.
6. The measured optical spectrum of the 1300nm shows strong absorption lines in the wavelength range from 1340nm to 1460nm which are believed to origin from absorptions in the atmosphere.
ORDERING INFORMATION
Please use the following part number to order product from EXALOS:
商品属性 [波长] 1310nm [功率] 3mW [封装方式] TOSA [光谱宽度] 40nm