266 nm MaxLine® laser clean-up filter
Part Number: LL01-266-25
• Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
266 nm MaxLine® laser clean-up filter
MaxLine laser-line filters transmit greater than 90% of the light at a precisely defined laser line, while offering incredibly steep edges
to eliminate optical noise from non-lasing (plasma) lines and spontaneous emission.
Part Number
Size
LL01-266-25
25 mm x 3.5 mm
Optical Specifications
Specification
Value
Transmission Band 1
Tabs > 55% 266 nm
Center Wavelength 1
266 nm
Guaranteed Minimum Bandwidth 1
Transmission guaranteed for laser wavelength only
FWHM Bandwidth 1 (nominal)
1.9 nm (typical); 2.4 nm (maximum)
Blocking Band 1
ODabs > 5 242.8 – 263.3 nm
Blocking Band 2
ODabs > 6 244.7 – 262 nm
Blocking Band 3
ODabs > 6 270 – 292.6 nm
Blocking Band 4
ODabs > 5 268.7 – 302.2 nm
General Filter Specifications
Specification
Value
Laser Wavelength 1
266 nm
Angle of Incidence
0 ± 2 degrees
Cone Half-angle
0.5 degrees
Optical Damage Rating
0.1 J/cm2 @ 532 nm (10 ns pulse width)
Effective Index
1.82
Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
Specification
Value
Transverse Dimensions (Diameter)
12.5 mm
Transverse Dimensions 2 (Diameter)
25 mm
Transverse Tolerance (mounted)
+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)
3.5 mm
Filter Thickness Tolerance (Mounted)
± 0.1 mm
Clear Aperture
≥ 10 mm
Clear Aperture 2
≥ 22 mm
Scratch-Dig
60-40
Substrate Type
Fused Silica
Substrate Thickness (unmounted)
2.0 mm
Substrate Thickness Tolerance (unmounted)
± 0.1 mm
Orientation
Arrow on ring indicates preferred direction of propagation of light
商品属性 [通频带] Tabs > 55% 266 nm [中心波长] 266nm [尺寸] 25 mm x 3.5 mm [FWHM] 1.9 nm (typ); 2.4 nm (max)