Smart Product Number: 1550B-HP-80
1550 nm Reduced Clad Select Cutoff Single-Mode Fiber
Nufern’s 1550B-HP high-performance select cutoff bend insensitive single-mode fiber is optimized for use in small form factor active and passive components requiring tight bend radii. With a bend loss considerably lower than SMF-28™, 1550B-HP is ideal for the video leg in FTTH CWDM and applications such as smaller form factor C and Lband components and low NA planar waveguides.
Optical Specifications
Operating Wavelength
1460 – 1620 nm
Core NA
0.130
Mode Field Diameter
9.5 ± 0.5 µm @ 1550 nm
Cutoff
1400 ± 50 nm
Core Attenuation
≤ 0.5 dB/km @ 1550 nm
Geometrical & Mechanical Specifications
Cladding Diameter
80.0 ± 1.0 µm
Core Diameter
9.0 µm
Coating Diameter
165.0 ± 10.0 µm
Coating Concentricity
< 5.0 µm
Core/Clad Offset
≤ 0.50 μm
Coating Material
Acrylate
Operating Temperature Range
-55 to 85 °C
Short Term Bend Radius
≥ 4 mm
Long Term Bend Radius
≥ 9 mm
Prooftest Level
≥ 200 kpsi (1.4 GN/m²)
Comments
Bend Loss: The Bend Loss at 1550 nm per turn at the Long Term Bend Radius is 0.15 dB per turn, by design.
Bend Radius: The Bend Radius at 1550 nm for 0.05 dB per 100 turns is 15 mm, by design.
Coating Requirements: UV Cured, Dual Acrylate
Features & Benefits
Optimized cutoff for 1550 nm wavelength — Extremely low bend loss
Tight mechanical and optical tolerances — high yield component manufacturing
Mode matched to SMF-28 — Low splice loss to standard fibers
High proof test for tighter bends — Critical for long-term reliability in tight bend applications
Typical Applications
FTTx components and modules
Compact C and L-band components
Low NA planar waveguides
Metro components
商品属性 [波长] 1460 - 1620 nm [掺杂类型] Ge [芯径大小] 9 µm [首包层直径] 80 µm [数值孔径] 0.130 [光学包层] Single