1064nm Source Module, with FBG, 200mW Output
The Amonics Fiber Coupled Laser source uses internally pigtailed laser diodes that are controlled by Thermal Electric Cooler (TEC) and high precision current source. Its operating wavelength is further stabilized by a built-in Fiber Bragg Grating (FBG) device. These laser sources feature narrow spectral line width, low Relative Intensity Noise (RIN) and excellent output power stability. An optional single-mode isolator greatly reduces optical back-reflection to the laser source to further minimize system noise. Feature:
- Fiber Bragg Grating (FBG) built-in
- Single Mode (SM) output
- 0.02dB stability over 8 hours
- 10 year+ operating life
Technical Specifications
Model Number
AFP-1064-200-M
Laser Type
14-Pin Butterfly, FBG Stabilized
Center Wavelength
1064nm ± 1nm
Output Power
200mW minimum
Polarization Extinction Ratio
N/A
Laser Linewidth
1nm maximum
TEC Cooled
Yes
Optical Isolator
30dB typical (Optional)
Output Stability
± 0.02dB over 8 hours
Modulation Bandwidth
CW, 1MHz
Environment / User Interface
Power Supply
5 VDC
LCD Display
NA
Controls
Laser, On/Off
Computer Interface
NA
Electrical Connectors
DB25 with cable
Optical Connectors
FC/UPC, FC/APC
Optical Fiber
HI1060
Dimensions
100mm(W) x 120mm(L) x 18mm(H)
Operation Temperature Range
-10°C to +50°C
Storage Temperature Range
-40°C to +70°C
商品属性 [波长] 1064nm ± 1nm [功率] 200mW [输出类型] CW