33 dBm, Er/Yb Fiber Amplifier, Rackmount, Polarizing Maintaing for Pulse Operation
Optilab’s EYDFA series is a Er/Yb Doped Fiber Amplifier that utilizes multimode laser pumping, all-fiber combiner and Erbium/Ytterbium double-clad, largecore fiber technologies to achieve high output power in conjunction with low cost. The output level of the EYDFA amplifier exceeds 10 W in CW operation, and adding an optional input stage EDFA allows a low input signal level of -25 dBm.
Options
• Adding a Input stage EDFA to allow low input signal level of -25 dBm
• Installing an ASE (Amplified Spontaneous Emission) filter for pulse amplification
• Output power monitoring
• Polarization Maintaining (PM) fiber designFeatures
• High output power of up to 43 dBm
• Customizable for various application
• High optical gain of 50 dB
• Control with RS-232 interface
Technical Specifications
Model Number
EYDFA-33-PM
Operating Wavelength Range
1533-1565nm
Output Power
+33dBm minimum
Input Signal Level
-6dBm to +3dBm
Optical Gain
35dB @ -3dBm, typical
Noise Figure
5.0dB @ 0dBm, typical
Input Isolation
30dB typical
Output Isolation
30dB typical
Polarization Exinction Ratio
20dB typical
Control Mode
ACC Standard, APC (optional)
Environment / User Interface
Display
LCD: Output Power, Pump Laser Current
Controls
Keylock Switch, Pump Laser Current, LOS Threshold Level
Monitors
Input Power, Output Power, Loss of Signal (LOS)
Protection
Pump Laser Over-Temperature
Computer Interface
RS232, Labview software CD-ROM included
Optical Fiber Type
Fujikura PANDA
Optical Connectors
FC/APC, FC/UPC
Electrical Connector
RS232 - Cable Included
Power Supply
80-240 VAC, 43-63Hz
Dimensions
350mm(L) x 300mm(W) x 100mm(H)
Operating Temperature Range
0˚C to +50˚C
Storage Temperature Range
-10˚C to +70˚C
商品属性 [波长] 1533-1565nm [输入功率] -6dBm to +3dBm [输出功率] +33dBm minimum