C-Band EDFA Module, +17 dBm
The Optilab EDFA-C-17-M Erbium Doped Fiber Amplifier Module is an ideal building block for photonic subsystems and OEM system integration. Using a specifically qualified FBG stabilized, high power pump laser, this EDFA module is designed for minimal electrical power consumption and thermal loading. Under normal operating conditions, this module will draw less than 8 W of power, and it requires only a single 5 VDC power supply for operation. Pump laser protection and alarms are equipped to ensure the reliabilty and safety of the EDFA-C-17-M, and status monitoring and output power level adjustment is controllable via an RS-232 interface. Contact Optilab for more information.
Features
• Adjustable output up to +17 dBm
• Full C-band operating range
• Low noise figure
• High reliability pump laser
• Wide operation temperature range
• Single +5 V power supply
• RS-232 interface
Technical Specifications
Model Number
EDFA-C-17-M
Wavelength Range
1528 nm to 1563 nm
Output Power
Up to +21 dBm adjustable
Input Signal Level
-15 dBm to +3 dBm
Optical Gain
> 26 dB typ. @ -5 dBm input
Noise Figure
5.0 dB typ. @ -5 dBm input
Input Isolation
30 dB min.
Output Isolation
30 dB min.
Polarization Dependent Gain
0.3 dB max.
Control Modes
ACC
Environment / User Interface
Display
n/a
Controls
RS232 for output power adjustment
Monitors
n/a
Protection
n/a
Computer Interface
n/a
Optical Fiber Type
SMF-28
Optical Connectors
FC/APC
Electrical Connectors
30 Pin Ribbon IDC Connector
Power Supply
+5 V DC, 400 mA max.
Dimensions
90 mm x 70 mm x 18 mm
Operating Temperature Range
-20˚C to +60˚C
商品属性 [波长] 1528 nm to 1563 nm [输入功率] -15 dBm to +3 dBm [输出功率] Up to +21 dBm adjustable