FQCW 266-10
Diode Pumped Continuous Wave Solid State Laser
266 nm
Continuous Wave
Single Frequency
Low Noise
TEM00
Up to 10 mW
Conduction Cooling
raman • inspectiona • nalytics • DVDmastering
Optical Data
Model
FQCW 266-10
Nominal Output Power
10 mW
Output Power Adjustability
2 – 12 mW
Wavelength
266 nm
Linewidth
< 300 kHz
Coherence Length
> 1000 m
Beam Quality Factor M2
< 1.3
Polarization
vertical, > 100:1
Beam Diameter
0.55 mm 20 %
Beam Divergence (full angle)
< 0.8 mrad
Beam Pointing Stability 1)
< 3 rad / K
Static Alignment Tolerance 3)
Position < 0.25 mm, Angle < 2.5 mrad
Power Stability 1) (8 h, 1 s average)
< 1 % rms
Noise (100 kHz - 10 MHz)
< 0.5 % rms
Electrical Data
Line Voltage
90 V - 250 V AC
Power Consumption Mean (Max)
100 W (200 W)
Communication Interface
USB / RS 232
Safety Equipment
key switch, interlock
Miscellaneous
Dimensions (control unit)
363 x 325 x 115 mm
Weight (control unit)
5.3 kg
Dimensions (laser head)
379 x 270 x 91 mm
Weight (laser head)
17 kg
Operating Temperature
20 C to 35 C non-condensing
Warm-up Time (cold start)
< 15 minutes
Notes
1. After 30 minutes warm-up in the temperature range 20 - 35 C, temperature change < 1 C/hour.
2. The exit window is equipped with the Manual Window Shifter (MWS) in case of external photo contamination. This laser system is not equipped with the Automatic Crystal Shifter (ACS) due to the lower power densities on all internal optical elements.
3. Position and angle of static alignment tolerances are specified with regard to laser beam exit.
商品属性 [波长] 266nm [功率] 10mW