BROADBAND LINEAR AMPLIFIER
Model P200
HIGH VOLTAGE
±100V
GAIN
10x
HIGH CURRENT
1 A
HIGH SLEW RATE
30 V/µsPOW ER BANDWIDTH
DC to ca 80 kHz
SMALL SIGNAL BANDWIDTH
DC to >200 kHz
GENERAL DESCRIPTION
The P200 is a general purpose linear amplifier with high voltage and high output current. Intended applications are piezoelectric positioning, electrostatic transducers and other high voltage instrumentation.
INPUT AMPLITUDE
The P200 amplifier has a fixed gain of x10 and the input resistance of 1 MΩ The input amplitude should be within -10…+10 V giving output voltage in the range -100…+100V. Higher input voltage will be limited to -10…+10 V range by the input protection circuit. Above ca 300% overvoltage at the input a microfuse may be blown. In such a case there will be no signal at the output (see below). For your convenience one spare fuse is provided on the amplifier’s printed-circuit board inside the enclosure.
FREQUENCY RESPONSE
SUMMARY OF TECHNICAL DATA
Bandwidth:
DC to about 80 kHz at 200 Vpp
Small signal bandwidth:
DC to >200 kHz
Amplification:
10 times fixed
Load: type
resistive || capacitive
Impedance: input
output
1 MΩ || <30 pF
1 Ω in the linear mode
Voltage: input
maximum ±10 V
Current: output
maximum 1 A
Slew Rate: output
ca 30 V/µs
Input protection fuse
15 mA (Littelfuse, part number 272.015) one spare fuse provided inside the instrument,
additional fuses available from Littelfuse resellers or from FLC Electronics AB.
Operating Ambient Temperature:
0°C to 30°C
Storage Temperature:
0°C to 60°C
Relative Humidity:
up to 90% (operation)
30% to 50% (storage)
Power Requirements:
100/110 V or 220/230 V, 50/60 Hz
Fuse:
100/110 V: 4 A (slow), 220/230 V: 2 A (slow)
Dimensions (H/W/L):
112 x 255 x 316 (mm)
Weight:
6 kg
Country of Origin:
Sweden
Note: Specifications apply to instruments operating at 23°C±5°C ambient temperature after 15 min. warm-up time. Due to ongoing product development, specifications are subject to change without notice.
商品属性 [频率] DC to about 80 kHz at 200 Vpp