QSI 660
The QSI 660 model camera employs a 6.1mp Sony CCD image sensor. This new generation of Sony sensor offers remarkable sensitivity with peak QE of over 75%. The high senstivity, wide dynamic range, dual read rates, low noise performance and internal 5 or 8-position color filter wheels make the QSI 660 ideally suited to a broad range of demanding scientific, medical, astronomical, and industrial imaging applications.
The QSI 660wsg is available with an Integrated Guider Port (IGP) allowing astronomers to guide using the light from the main telescope while picking off the light from the guide star in front of the filters.
The 660 camera system is supported by industry leading astronomy and microscopy image acquisition software plus a full camera control API is available for creating custom Windows or Linux applications.
• High Performance CCD Image Sensor
• Leading Edge Technical Performance
• Refined Design
• Efficient, Low Power CCD Sensor Cooling
• Two Shutters and a Filter Wheel
• Innovative Integrated Guider Port
• Connectivity and Notification
• Extensive Software Support
Model 660 CCD Image Sensor Specifications
Feature
Standard
CCD Manufacturer & Model
Sony ICX694
CCD Architecture
Interline Transfer
Microlens
Yes
Anti-blooming
Yes – 800x suppression
Imager Size: (WxH)
12.48mm x 9.98mm
Pixel Array (WxH):
2758 x 2208 active (6.1 megapixels)
Pixel Size:
4.54µm x 4.54µm
Typical Values
Pixel Full Well Depth
19,000 e-
Absolute Quantum Efficiency
Peak: 77% at 560nm
Pixel Dark Current
<0.002 electrons per second at -10°C
Intrinsic Read Noise
3.1 electrons RMS
Dynamic Range
75db
Model 660 Camera Specifications (See additional 660wsg(-8) specifications below>>)
Feature
Model 660i
Model 660s
Model 660ws(-8)
CCD Image Sensor
Sony ICX694
Electronic Shutter
100µsec to 240 minutes
100µsec to 240 minutes
100µsec to 240 minutes
Mechanical Shutter
No
Yes
Yes
Internal Color Filter Wheel
No
No
ws – 5-Position CFW
ws-8 – 8-position CFW
Holds 1.25″ or opt. 31mm filtersCamera Body Configuration
Slim
EnclosureMedium
EnclosureFull
EnclosureDimensions
W4.45” x H4.45” x D1.68”
(add 0.225″ for T-Mount)W4.45” x H4.45” x D2.00”
(add 0.225″ for T-Mount)5-pos, W4.45” x H4.45” x D2.50”
8-pos, W5.86” x H5.56” x D2.50”
(add 0.225″ for T-Mount)Weight, without Nosepiece
26 oz. / 740g
34 oz. / 950g
5-pos, 40 oz. / 1130g
8-pos, 51 oz. / 1450gOptical Back Focus
(w/o Filters in path)0.58″ w/ T-mount adapter
0.68″ w/ C-mount adapter
0.35″ w/ no adapter0.90″ w/ T-mount adapter
0.68″ w/ C-mount adapter
0.68″ w/ no adapter1.40″ w/ T-mount adapter
1.18″ w/ C-mount adapter
1.18″ w/ no adapterThermoelectric CCD Cooling
Temperature regulation +/- 0.1°C, @ 0°C to -40°C CCD temperature
In free air,
Fans @ Full SpeedTypically 40°C below ambient air with 85% cooling power
With Opt Liquid Cooling – Fans Off
Typically 45°C below circulating liquid with 85% cooling power
(adds 0.75″ to camera depth)Cooling Fan Control
Intelligent, user configurable
Read Rate
User Selectable High Quality mode at 800KHz, High Speed mode at 8MHz
Camera Gain
User Selectable High Gain 0.17 e-/ADU (default), Low Gain 0.40 e-/ADU
Digital Resolution
16 bits (both High Quality and High Speed mode)
Total System Read Noise
3 electrons RMS typical in High Quality mode
7 electrons RMS typical in High Speed modePixel Dark Current
<0.002 electrons per second at -10°C
Full Image Read and Download Time
Typically <9 second (host computer dependent) in High Quality Mode (800KHz)
Typically <1 second (host computer dependent) in High Speed Mode (8MHz)
Image download times will be reduced with binning and/or subframe (ROI)Binning Modes
Symmetrical and Asymmetrical binning up to 9 pixels horizonally or vertically
Status and Notification
User configurable multi-color LED status indicator and multifunction
audible beeper. Over-temperature and high/low voltage alarms.Power Consumption
12v, 2A (24 watts) at max cooling, max fans and filter moving
(25 AC watts max with included 90-240V AC power supply)Operating Environment
Temperature: -20°C to 30°C, Humidity: 10% to 90% non-condensing
Computer Connectivity
USB 2.0 High Speed (USB 1.1 compatible)
Other Ports
Optically isolated 4 channel control port for telescope guiding
or input/output shutter trigger (See API Reference Manual for details)T Mounting Adapter
Standard – T-Thread, 42mm x .75mm pitch
C Mounting Adapter
(1″ x 32TPI)
(Not recommeded for 540i)Optional, C-Mount (Type I) lens focus compatible
(17.5mm backfocus)Optional, C-Mount (Type II) lens focus compatible
(17.5mm backfocus)Optional, for non-lens adapters and accessories
(standard C-Mount lens does not reach focus at infinity)Nosepiece
Standard, T-Adapter to 2″ nosepiece
Optional, T-Adapter to 1.25″ nosepiece
Additional Model 660wsg(-8) Camera Specifications
Feature
QSI 600 Series wsg(-8)
Camera Body Configuration
Integrated Guider Port
EnclosureDimensions
5-pos wsg, W4.45” x H5.0” x D3.08”
8-pos wsg-8, W5.86” x H6.1” x D3.08”
(add 0.225″ for T-Mount, 0.35″ for 2.156″ thread mount)Weight, without Nosepiece
5-pos, 46 oz. / 1300g
8-pos, 56 oz. / 1600gOptical Back Focus
(without Filters in path)2.10″ (53.3mm) with 2.156″ thread adapter (optional)
1.98″ (50.2mm) with T mounting adapter
1.75″ (44.5mm) w/o mounting adapterGuide Camera Attachment
T-mount (42mm x 0.75mm) w/built-in manual rotator
C-mount (1″ x 32 tpi) w/built-in manual rotatorGuide Camera Optical Focal Depth
12.5mm +/- 1.5mm (0.49″ +/- 0.06″)
Face Plate Adapter
Standard adapter – T-mount (2.156″ x 24tpi adapter available)
Nosepiece
Standard T-mount to 2″ nosepiece.
Optional 2″ nosepiece for 2.156 adapter
商品属性 [Pixel Size] 4.54µm x 4.54µm [Image area] 12.48mm x 9.98mm