aeroPULSE FS60 high power femtosecond laser
The aeroPULSE FS60 is our new industrial-grade femtosecond fiber laser based on our world-leading photonic crystal fiber platform.
Developed for both demanding 24/7 OEM and academic applications, the aeroPULSE FS60 delivers high unit-to-unit consistency and uptime, low cost of ownership, and ease of integration.
Ultra-short femtosecond pulses
This high performance and rugged OEM fiber laser utilize state-of-the-art mode-locking technology to deliver ultra-short femtosecond pulses with outstanding long-term stability, superior pulse-to-pulse stability, low noise, and excellent beam pointing stability.
Developed for cutting edge applications
The aeroPULSE FS60 is designed for a diverse range of applications including thin film cutting, glass cutting, stent, and other medical devices, IC package cutting, scribing, OPA pumping, and material processing.
With the introduction of programmable amplifier burst control, higher ablation rates or depths can be achieved over non-burst processing for many applications. This new feature allows for full process optimization.
As standard, the aeroPULSE FS60 is available with output powers up to 60 W at 1030 nm. With tuneable pulse duration and a high range of repetition rates, the aeroPULSE FS60 is a flexible, cost-effective femtosecond laser.
Get the dual wavelength second harmonic module
The attachable second-harmonic generation (SHG) module makes it possible to switch between 20 μJ at 515 nm and 40 μJ at 1030 nm. The wavelength is selected via software.
Maintenance-free and OEM-ready
Utilizing NKT Photonics propriety optoCAGETM technology results in no alignment for ultimate reliability. The aeroPULSE FS60 guarantees high stability with 24/7 operation and is ideal for OEM integration.
The system can be remotely controlled via an RS-232 interface and incorporates extensive onboard data logging of key parameters.
Features
Average powers of >60 W @1030 nm and 30 W @515 nm
Pulse energies of >40 μJ @1030 nm and >20 μJ @515 nm
Available pulse widths <500 fs – 3 ps
Up to 50 MHz repetition rate
Excellent beam pointing stability
Programmable amplifier burst control
Based on world-leading photonic crystal fiber technology
Designed for industrial reliability
System monitoring via remote diagnostics
Plug and Play
Maintenance-free 24/7 operation
Optical
Model
aeroPULSE FS60
With dual wavelength module
Power [W]
> 60
> 30
Center wavelength [nm]
1030 ± 5
515 ± 2
Pulse duration [fs]
< 500 – 3000
< 500 – 3000
Pulse energy [µJ]
> 40 (up to 1.5 MHz)
> 20 (up to 1.5 MHz)
Repetition rate [MHz]
1.0 – 50
1.0 – 50
Repetition rate with output AOM [MHz]
S.S. – 1.5
S.S. – 1.5
Beam diameter [mm]
2.5 ± 0.5
2.0 ± 0.5
Beam divergence [mrad]
< 1
< 1
Spatial mode, fundamental
M2 ≤ 1.2
M2 ≤ 1.2
Beam asymmetry/ellipticity [%]
< 15
< 15
Power stability (8 hours), RMS [%]
< 0.5
< 0.5
Pointing stability (8 hours) [µrad]
< 50
< 50
Polarization - linear, PER [dB]
> 20
> 20
Mechanical/Electrical
Model
aeroPULSE FS60
With dual wavelength module
Computer interface
USB 2.0, RS-232, Ethernet
USB 2.0, RS-232, Ethernet
Operating voltage
100-240 VAC, 50-60 Hz
100-240 VAC, 50-60 Hz
Power consumption [W]
< 600
< 600
Operation temperature [°C]
15 – 35
15 – 35
Storage temperature [°C]
-20 – 60
-20 – 60
Laser head dimensions (WxHxL) [mm3]
647.5 x 142 x 350
809.5 x 142 x 350
Laser head weight [kg]
35
39
Control unit dimensions (WxHxL) [mm3]
442 x 168.5 x 374
442 x 168.5 x 374
Control unit weight [kg]
18.5
18.5
Umbilical length [m]
4
4
Chiller dimensions (WxHxL) [mm3]
482 x 310 x 550
482 x 310 x 550
Chillerweight [kg]
40
40
Cooling
Water-based
Water-based
商品属性 [波长] 1030 ± 5nm [脉宽] < 500 – 3000fs [脉冲能量] > 40uJ (up to 1.5 MHz) [平均功率] > 60W [重复频率] 1.0 – 50MHz