IR Polarizers
IR-polarizers operate in transmission and are designed to polarize IR radiation in the spectral region from 1.5 μm to MM waves. They are a sort of diffraction gratings and available on a variety of crystal and polymer substrates. The polarizer grating is made by forming grooves of a triangle profile on the substrate and subsequent deposition of a metal coating (aluminum) on one of the groove facets.
Applications
Microscop;
Thin film layer studies;
Semiconductors studies;
Electro-optic modulation systems;
Molecular orientation studies of crystal or polymer films;
Imaging;
Sensors and detectors;
Spectroscopic instruments
Features
Used in wavelength range from NIR to MM;
Crystal and polymer substrates;
Very compact with short optical path;
High IR transmission;
High degree of polarization;
Polarizers are supplied in holders (protective ring with marked grid direction).
Tab. 1 Advantages of grid polarizers compared to other types of polarizers.
Grid polarizers
Wire grid substrate-free polarizers
Brewster and birefringent polarizers
Relatively low cost
Valid
Not valid
Compactness (optimal correlation between overall dimensions and clear aperture)
Not valid
Valid
Zero lateral image displacement at normal incidence
Not valid
Valid
Performance insensitive to the angle of incidence
Not valid
Valid
Possibility to use one polarizer for the wide wavelength range
Valid
Valid
High mechanical durability (for crystal polarizers)
Valid
Not valid
Tab. 2 Parameters of IR-polarizers.
Substrate material
CaF2
BaF2
ZnSe
Ge
Fluorine-
plast (teflon)Polypropylene
Spectral range, mm
1-9
1.5-12
1.5-14
8-14
1.5-7
2-7
>= 15
Typical operation aperture, mm
D25 x 25
DD25 x 25
D25 x 25
D25 x 25
D25
D25
Standard holder size at typical aperture, mm
D42 x 8
D42 x 8
D42 x 8
D42 x 8
D42 x 8 or
D34.9 x 7.9D40 x 8
Maximal operation aperture, mm
50 x 50/
/D5050 x 50/
/D5050 x 50/
/D5050 x 50/
/D5080
100
50
Grooves per mm
2400
1200
1200
1200
2400
1200
1200
Transmission efficiency K1 (average)
>70%
>70%
65-70% (back side AR coated) >50% (uncoated)
>50% (back side AR coated)
75-85%
75-80%
70-90 (avg. 80)
@15-1500 μmTransmission of unwanted radiation K2
1-2%@
1.5µm
<0.5%@
2 µm
<0,1@
3-9µm1-2%@
2µm
<0.1%@
11µm1-2%@
2µm
<0.1%@
10µm<0.1%@
10µm<1%@
1.5 µm
<0.5%@
2µm
<0.1%@
3-7µm<2%@
1.5µm
<0.1%@
3µm0.2 @15 μm
<0.3 @15-600 μm
<1 @600-1500 μmDegree of polarization (K1-K2)/
(K1+K2)94-97%
@1.5µm
>98%@
2µm
>99%@
3-9µm94-97%
@2µm
>99%@
3-11µm94-97%@
2µm
(AR coated)
92-96%@
2µm (uncoated)
>99%@
10µm>99%@
10µm>97%@
1.5µm
>99%@
2-7µm>97%@
2µm
>99%@
3-7µm99.5 @15 μm
>96 @15-1500 μmExtinction ratio
E=K1/(2*K2)15-35@
1.5µm
70@
2µm
350@
3-9µm15-35@
2µm
350@
11µm15-35@
2µm
325-350@
10µm
(AR coated) 10-25@
2µm
250@
10µm (uncoated)>250@ 10µm (uncoated)
40-45@
1.5µm
70-85@
2µm
380-430@
3-7µm>40@
1.5µm
380-400@
3µm100-10000 @15-500 μm
75-200 @500-1500 μm
Sizes and shapes
Depending on the substrate material we produce polarizers using the ruled grating technique or the photolithography one.
Crystal polarizers
The grid is ruled onto the (normally) round substrate. After ruling the substrate is left uncut.
The shape of ruled area is shown below (polygon or round shape). These additional efforts are made to decrease the substrate size at the same clear aperture (for adjusting the polarizer into the standard setup).
Polymer polarizers
The grid is ruled onto large size material, which is subsequently cut. Thus the clear aperture can be round.
The main standards for clear aperture (CA) of polarizers are D25mm and 25x25mm, which are available from our stock. Polarizers with non-standard sizes, shapes and operational wavelength regions are available on request.
Holder sizes at the standard aperture:
Crystal polarizers: D42mm x T8mm or D34.9mm x T7.9mm
Polymer polarizers: D42mm x T8mm or D34.9mm x T7.9mmAnti-reflective (AR) coatings
Due to low refractive index of CaF2, BaF2, teflon, and polypropylene, there is no need for AR coatings for their effective operation.
However Germanium and Zinc Selenide have high refractive indices. Therefore to enhance the transmission of polarizers, we supply them Broad Band Antireflective coated over the whole transmission range.
Further enhancement of polarizer transmission is possible by optimizing the coating for specific wavelengths. The resulting transmission depends on the width of the coating spectral range (for narrower wavelength ranges, the transmission within this region is higher).
! Polarizers from our stock are not AR coated. Please request your polarizers depending on their operational spectral region, to optimize the parameters for ZnSe, or Ge items.