ASF. Single-Shot Autocorrelator for Femtosecond and Picosecond Pulses
This single-shot autocorrelator family is designed to measure a wide range of laser sources from ultrafast oscillators to amplifiers in single-shot and multiple shot accumulation mode. The system is also indispensable for real-time control and alignment of low repetition rate amplifier systems.
Possible wavelength range from 400 nm to 2200 nm
5 fs to 15 ps possible pulse duration measurement
USB interface with Windows PC software and LabView drivers in a standard package
CCD 2D detector for precise data acquisition with lowest error
1 uJ single-shot sensitivity
ASF-5
ASF-15
ASF-30
ASF-50
ASF-200
Possible wavelength range*
400-2200 nm
450-2200 nm
700-2100 nm
450-2200 nm
450-2200 nm
Input pulse duration range
5-200 fs
15-200 fs
30 fs - 1 ps
50 fs - 2 ps
200 fs - 10** ps
Required pulse energy
single-shot mode: from 1 uJ at <200 fs; up to 100 uJ at 10 ps;
multiple-shot mode: from 1.2 nJ at <100 fs, 80-100 MHz (~100 mW average power)Input pulse repetition rate
single-shot...150 MHz;
single-shot mode (registration of single pulses): from single-shot to 50 kHz;
multiple-shot mode (averaging of 2 or more pulses): >50 kHzInput polarization
linear, horizontal (vertical upon request)
Data interface
USB with Windows PC acquisition and analysis software (included in the standard package)
Dimensions (LxWxH)
248x54x54 mm
156x120x70 mm
105x120x70 mm
215x120x70 mm
430x240x80 mm
Input beam height range (customized on request)
47/67/87/107 mm (fixed, select one value)
56-180 mm
(select at order)29...180 mm
(select at order)64-180 mm
(select at order)64-180 mm
(select at order)* - exact wavelength range is quoted based on each customer's requirements;
** - from 500 fs to 15 ps on request; combined ranges from 100 fs may also be possible upon request for some cases.
商品属性 [波长范围] 450-2200 nm [Input pulse duration range] 15-200 fs [Input pulse repetition rate] single-shot...150 MHz