The
VaryDisk NANO is a fully functional laser system for laboratory
investigations and/or industrial use. The output specifications of the
VaryDisk NANO is characterized by nanosecond pulse durations (approx.
> 30 ns). Depending on our customers need, the pulse duration can be
variied and additional specifications can be adjusted accordingly. The
VaryDisk NANO is based on a robust design with least complexity compared
to our other VaryDisk systems. Depending on the individual choice of
parameters, the VaryDisk laser system qualifies as industrial
/ scientific or prototype laser system.
FEATURES
output power: up to 1000 W with power upgrade (p)
pulse energy: up to 150 mJ with energy upgrade (+)
pulse duration approx.: ≤ 40 ns
repetition rate: 1 kHz ... 20 kHz
wavelength: 1030 nm
beam quality: < 1.3 @ 150W; multimode @ 1 kW
SCHEMATIC DESIGN
The VaryDisk NANO is based on a robust design with least complexity compared to our other VaryDisk systems.
Schematic setup of the VaryDisk nano laser system
OPTIONS
We offer different options along with the
base versions of the VaryDisk system in order to increase the output
power and/or to allow additional operating modes along with the
generation of different pulse characteristics, e.g. different choices of
pulse durations, wavelength, or even the simultaneous generation of
pulses with different pulse characteristics in one operation mode. Some
of the available options are listed below. Please consult our team for
possible combination choices and further information.
APPLICATIONS
Application examples, showing the
capabilities of the VaryDisk laser system, were demonstrated in our
application lab. Please consult D+G for further information.for further
information, please consult our team...
DIMENSIONS / WEIGHT
All data given here are approximate, since nearly every laser is
unique with respect to our customers requests (even the specifications
given here):
laser head approx. 200 kg, (80 x 70 x 45) cm3 without optional modules
rack approx. 200 kg, (100 ... 180 x 80 x 56) cm3
laser head / rack connection: 4m
additional chiller might be required with up to 250 kg, (60 x 58 x 155) cm3 (depending on output power and repetition rate)
OPERATING CONDITIONS
power supply 3 phases 380 V, 50 Hz + N + ground, CEE 32 A plug
power consumption < 4 kW ... 6 kW
water connection barbed fittings for tubing 13 mm or 16 mm inner diameter
water flow 15 l/min @ 12 °C – 25 °C
water quality filtered 80 μm recommended, low chlorine concentration (< 200 mg/l)
20 - 25°C operating temperature, low humidity