Model 588 | 0.001 Hz to 20 MHz1U Rackmount Digital Delay / Pulse Generator
BNC's Model 588 offers an innovative approach to high-quality timing and synchronizing systems. Giving users 8 channels of precision timing in a package designed for remote applications and large system gating/synchronizing.
Our precision clock and many channel features compliment the low-profile packaging to give system integrators a refined rack-mount alternative to multiple boxes and cables cobbled together around a test setup.
The Model 588 can accept a low amplitude clock frequency down to 20 mV, up to 100 MHz. This offers the ability to phase-lock directly to a laser photodiode signal, providing system timing synchronicity with the laser with very low jitter (< 50 ps). The 588 offers TCP/IP communication methods for SCPI commands. Complimentary NI certified LabVIEW drivers available.
OVERVIEW
Quick Specs
Applications
Channels: 4 or 8 Independent Channels
Resolution: 200 ns
Accuracy: 100ns + 0.0001x delay
Jitter: 100 ns RMS
Voltage: TTL / 20 V Adjustable
Memory: 12 Storage Slots
Timing and Synchronizing
Explosive Testing
Airbag (Squibb) Testing
CHANNEL MODES APPLICATIONS
Independent Channel Enable/Disable Delayed Channel Enable – allows flashlamp/diodes to be fired, stabilizing the laser before the Qswitch or shutter is enabled.
Single shot or Burst mode laser pulse bursts, controlling either just to Qswitch or entire laser. Duty Cycle mode allows firing laser at an optimal rate, but picking pulses out at the user required rate. Output Multiplexer allows any combination of channels to be output on any of the output ports, providing very complex pulse trains.
SPECIFICATIONS
I/O CONFIGURATION
Models
Number of Independent Outputs
588-4C
588-8C
4 Channels
8 Channels
OUTPUT MODULE (AT20)
TTL/CMOS Mode
Output Impedance
High
Output Level
4.0 V (typical) into 1 kΩ
Rise Time (10% - 90%)
3ns (typical)
Jitter
50 ps RMS channel to channel
Adjustable Mode
Output Level
2.0 V to 20.0 VDC into 1 kΩ or 1.0 V to 10.0 VDC into 50 Ω
Amplitude Resolution
10 mV
Current
200 mA typical, 400 mA (short pulses)
Rise Time (10% - 90%)
15 ns (typical) @ 20V into Hi-Z (25 ns typ @ 10V into 50 Ω)
Slew Rate
> 0.1V/ns
Overshoot
< 100mV + 10% of pulse amplitude
INPUT MODULE (IA15)
Trigger Input
Function
Generate individual pulses, start a burst or continuous stream
Rate
DC to 1/ (200 ns + longest active pulse). Maximum of 5 MHz
Slope
Rising or Falling
Threshold
200 mV to 15 VDC
Maximum Input
60 V Peak
Resolution
10 mV
Trigger Accuracy
±3% of Threshold Voltage
Impedance
1.5 kΩ + 40pF
Trigger Jitter
< 800 ps RMS
Insertion Delay
< 180 ns
Minimum Pulse Width
2 ns
Gate Input
Mode
Pulse or Output Inhibit
Polarity
Active High or Active Low
Channel Behavior
Global and Individual Channel
Pulse Inhibit Delay
120ns
Output Inhibit Delay
50ns
FEATURES
User Setting Storage
24 Memory Location
Communications
USB, RS-232, and Ethernet
External Clock In
10 MHz – 100 MHz in 1 MHz increments
External Clock Out
T0, Rate, Channel, 2x ExtPLL, 1x EXTPLL, ½ ExtPLL, ¼ Ext, 40 MHz, 20 MHz, 10 MHz, 5 MHz or Disabled.
PHYSICAL and ENVIRONMENTAL
Dimensions
19” x 10” x 1.75” [843 x 254 x 45mm]
Weight
8 lbs [17.6 kg]
Power
100 - 240 VAC 50/60 Hz <3 A
Fuse
3.15 A, 250 V Time-lag (Qty 2)
Operating Temp
32 - 104°F [0 - 40°C]
Transportation & Storage Temp
-40 - 158°F [-40 - 70°C]
INTERNAL RATE GENERATOR
Rate
0.0002 Hz to 10.000 MHz
Resolution
10 ns
Accuracy
1 ns + .0001 x period
Jitter
< 50 ps RMS
Settling
1 period
Burst mode
1 to 1,000,000 pulses
Timebase
100 MHz, low jitter PLL
Oscillator
50 MHz, 25 ppm
System output modes
Single Shot, Burst, Duty Cycle, Continuous
Pulse control
Internal Rate Generator, External Trigger, External Gate
PROGRAMMABLE TIMING GENERATOR
CHANNEL FEATURES
Channel Output Modes
Single Shot, Burst, Continuous, Duty Cycle
Control modes
Internally Triggered, Externally Triggered, and External Gate. Each channel may be independently set to any of the modes
Output Multiplexer
Any/all channels may be multiplexed to any/all
Delayed output
Output to 9,999,999 pulses
Timebase
Same as Internal Rate generator
Pulse Polarity
Normal, Complemented, and Inverted
DELAY
Range
0 - 1000 s
Accuracy
1 ns + .0001 x setpoint
Resolution
250 ps
Pulse Inhibit Delay
< 120 ns (typical)
Output Inhibit Delay
< 50 ns (typical)
WIDTH
Range
10ns - 1000 s
Accuracy
1 ns + .0001 x setpoint
Resolution
10 ns
SYSTEM OPTIONS
TZ50
Replaces Standard (AT20) TTL Hi-Z output with 50 Ω output impedance (for driving 50 Ω loads).
* Adjustable output module remains the same
I
Incrementing (provide automatic high speed incrementing/decrementing of delay and/or pulse width for each channel)
DT15
Dual trigger logic - provides additional trigger via gate input
EU
Replaces US standard plug to European standard plug
描述 [描述] 4通道数字延迟/脉冲发生器