Model 065 / 085 / 090 Optical Module
The Models 065, 085 and 090 are used in conjunction with the BNC Model 6040 Optical Pulse Generator Mainframe.
OVERVIEW
FEATURES
Trigger Internal 0.01 Hz to 100 MHz; external 0 to 100 MHz
Pulse Width 3 ns to 640 s
Impulse 400 ps typical (fixed)
Delay 0 ns to 640 s (plus fixed delay)
APPLICATIONS
Photo Multiplier
Photo Detector
Fiber Optics Testing
SPECIFICATIONS
LIGHT OUT
Spectral Peak
650nm / 850nm 904nm (+/- 15nm typical contact factory for selected wavelengths)
Spectral Width
less than 5nm (nominal)
Power Levels
0 to 2 mW baseline, 100 uW to 2 mW peak; independently adjustable. Impulse output fixed at 100 uW baseline, 1.5 mW peak (typical).
Custom Peak Power
065 - 10 mW | 085 - 20 mW | 095 - 20mW
Resolution
10 uW, 100 uW to 2 mW pulses; 0 to 2 mW in External Modulation and CW.
Transition Times (20% to 80%)
500 ps rise time, 1.5 ns fall time (pulses with zero baseline) 1 ns rise time, 1 ns fall time (pulses with non zero baseline).
Dynamic Range
13 dB, pulses with zero baseline; 20 dB, pulses with nonzero baselineExternal Modulation and CW.
Accuracy (Nonzero Baseline)
Absolute: +/- 1 dB, 200 uW to 2 mW. Relative: +/- 0.5 dB, 200 uW to 2 mW pulses;+ 30 uW, 200 uW to 2 mW for External Modulation and CW.
Temperature Coefficient
0.05 dB/°C.
Fiber
6/125 Single Mode Fiber standard (Contact Factory for custom); 0.21 NA.
Connector
ST Standared (Contact Factory for custom)
TIMING
Trigger
Internal 0.01 Hz to 100 MHz; external 0 to 100 MHz.
Pulse Width
3 ns to 640 s.
Impulse
400 ps typical (fixed).
Delay
0 ns to 640 s (plus fixed delay).
External Drive
0 to 200 MHz, pulses with zero baseline; 0 to 300 MHz, pulses with nonzerobaseline; 300 mV min. amplitude; 50 ohm input.
External Modulation
100 Hz to 700 MHz (-3 dB); 100mV rms/mW sensitivity (typical); 50 ohminput.
Module Delay
10 ns typical (fixed) mainframe's Pulse Out to Light Out. Jitter 100ps rms.
STORE
A ROM determines the instrument's allowable operating conditions and units of display applicable for the installed module.
A nonvolatile memory (RAM) in each module stores up to ten complete settings of operating conditions (trigger level, slope, etc.) and output pulse parameters.
RECALL
The RAM-stored settings can be manually or bus transferred to the mainframe to produce the predetermined outputs.
WEIGHT
2 Ibs net (0.9 kg); 5 Ibs shipping (2.3 kg). (When installed in a Model 6040 Mainframe, est. 24 lbs. shipping)
AMBIENT
Same as Model 6040 mainframe.
描述 [描述] 与BNC型6040型光脉冲发生器主机配套使用。