Model 130 - 1300 nm Optical Module
Models 090 and 106C provide operating capabilities unavailable from other 904 and 1064 nanometer optical sources. Among them, repetition rates to 100 MHz and precision control of amplitude and time domain.
Combined with the BNC Model 6040 Mainframe, these modules generate fast pulses, subnanosecond impulses, and CW light while maintaining the excellent timing accuracy, low jitter, and nanosecond resolution of the mainframe. In addition, the 090 and 106C have two inputs for stimulus from external signal sources: External Drive and External Modulation.
With External Drive, the optical outputs are fast edge speed, flat top pulses corresponding to the input signal timing. In External Modulation, an electrical signal is converted into analog optical form. Thus, it is now possible to transform signals from instruments such as a function or arbitrary waveform generator into their optical equivalents at 904 and 1064 nm, as well as the other wavelengths described in the Model 6040 product bulletin.
OVERVIEW
FEATURES
Trigger Internal 0.01 Hz to 100 MHz; external 0 to 100 MHz
Pulse Width 3 ns to 640 s
Impulse 400 ps typical (fixed)
Delay 0 ns to 640 s (plus fixed delay)
APPLICATIONS
Photo Multiplier
Photo Detector
Fiber Optics Testing
SPECIFICATIONS
LIGHT OUT
Spectral Peak
1310nm +/- 50nm (nominal)
Spectral Width
less than 5nm (nominal)
Power Levels
0 to 1mW baseline, 50uW to 1mW peak (up to 20mW custom); independently adjustable. Impulse output fixed at 50 uW baseline and 0.75 mW peak (typical).
Resolution
5 uW, 50 uW to 1 mW pulses; 0 to 1 mW in External Modulation and CW.
Transition Times (20% to 80%)
500 ps rise time, 1.5 ns fall time (pulses with zero baseline); 1 ns rise time, 1 ns fall time (pulses with non zero baseline).
Dynamic Range
13 dB, pulses with zero baseline; 20 dB, pulses with nonzero baseline, External Modulation and CW.
Accuracy (Nonzero Baseline)
Absolute: +/- 1 dB, 100 uW to 1 mW. Relative: +/- 0.5 dB,100 uW to 1 mW pulses; +/- 15 uW, 100 uW to 1 mW for External Modulation and CW.
Temperature Coefficient
0.05 dB/°C.
Fiber
8/125 Single Mode Fiber standard (contact factory for custom); 0.12 NA.
Connector
ST standard (Contact Factory for FC, custom).
TIMING
Trigger
Internal 0.01 Hz to 100 MHz; external 0 to 100 MHz.
Pulse Width
3 ns to 640 s.
Impulse
400 ps typical (fixed).
Delay
0 ns to 640 s (plus fixed delay).
External Drive
0 to 200 MHz, pulses with zero baseline; 0 to 300 MHz, pulses with nonzerobaseline; 300 mV min. amplitude; 50 ohm input.
External Modulation
100 Hz to 700 MHz (-3 dB); 200 mV rms/mW Sensitivity (typical); 50 ohminput.
STORE
A ROM determines the instrument's allowable operating conditions and units of display applicable for the installed module.
A nonvolatile memory (RAM) in each module stores up to ten complete settings of operating conditions (trigger level, slope, etc.) and output pulse parameters.
RECALL
The RAM-stored settings can be manually or bus transferred to the mainframe to produce the predetermined outputs.
WEIGHT
2 Ibs net (0.9 kg); 5 Ibs shipping (2.3 kg).
AMBIENT
Same as Model 6040 mainframe.
ACCESSORIES
Part Number
Description
P/N 6847
Model 130 Pigtail Cable for 130, 155, 2 meters, single mode fiber, 8/125um, ST connector at one end
P/N 6849
Model 130 Pigtail Cable for 130, 155, 2 meters, single mode fiber, 8/125um, FC connector at one end
P/N 6853M
Model 130 Pigtail Cable for 130, 155, 2 meters, multimode fiber, 50/125um, Terminated at one end with an SMA 906 connector
with a ceramic ferrule