FITELNINJA NJ001
The FITELNINJA NJ001 Hand-Held Single Fiber Fusion Splicer is suitable for all METRO, LAN and FTTx fibers including ultra bend-insensitive fibers. With its low-profile, compact and ruggedized body, the NJ001 offers reliable splicing under harsh environmental conditions. The large battery capacity makes it possible to perform 100 splicing and heating cycles. Combining portability, power, flexibility and field ruggedness, the NJ001 delivers fast and consistent splicing with outstanding mobility and optimal ease of use.
STANDARD PACKAGE
Item
P/N
Quantity
❶
FITELNINJA NJ001 Main body (including S946 battery)
NJ001-X-A-0001
1
❷
Hard Carrying Case
HCC-03
1
❸
Spare Electrodes
ELR-01
1 pair
❹
AC Adapter
S978A
1
❺
AC Cable Cord
―
1
❻
Electrode Sharpener
D5111
1
❼
Cleaning Brush
VGC-01
1
User Manual (CD)
UMC-01
1
Quick Reference Guide *3)
FTS-B492 or FTS-B495
1
*3) Quick reference guides are dependent on holder type.
SPECIFICATIONS
Applicable Fibers
SM (ITU-T G.652), MM (ITU-T G.651), DSF (ITU-T G.653),
NZD (ITU-T G655), BIF/UBIF (Bend Insensitive Fiber ITU-T G.657)
Cladding Diameter
125 µm
Coating Diameter
160 to 900 µm
Fibers Cleave Length
5 to 10 mm or 16 mm
Average Splice Loss
SM: 0.05 dB, MM: 0.02 dB, DSF 0.08 dB, NZD 0.08 dB, BIF/UBIF: 0.05 dB
Splice Time
13 seconds
Heat Time
17 seconds (40 mm sleeve *4)) , 20 seconds (60mm sleeve *4)) (Pre-heat mode) *5)
31 seconds (S922: 40 mm sleeve, S921: 60 mm sleeve) (Regular mode) *5)
Splice Programs
Max. 150
Heat Programs
Max. 30
Automatic Heating Start
Available
Applicable Sleeves
20/40/60 mm
Fiber Holder
Tight holder (Loose tube applicable) or Removal fiber holder system
Tension Test
1.96 N
Splice Return Loss
60 dB or more
Fiber Image Magnification
58X
Splice Memory
Max. 1500
Image Capture Capacity
Last 100 images to be automatically captured + Up to 24 images to be stored permanently
Dimension
124W × 161D × 64.5H mm (not including rubber pad) 139W × 176D × 71H mm (including rubber pad)
Weight
970 g (with S946 battery)
Monitor
3.5” color LCD monitor
Propulsion (motor)
8 N (Designed value)
Data Output
USB ver. 2.0 mini
Battery Capacity
Typically 100 splice/heat cycles *6)
Wind Protection
Max. wind velocity of 15 m/s.
Operating Temperature
-10 to 50°C (without excessive humidity)
Storage Temperature
-40 to 60°C (without excessive humidity)
Humidity
0 to 95% RH (non-condensing)
Power Source
AC input 100 to 240 V (50/60 Hz), DC Input 11 to 17 V without any change of hardware
*4) The heating time may vary depending on the type of sleeves.
*5) The first heating cycle after turning the power on can be longer than the standard heating time.
*6) The number of splicing and heating cycles the machine can perform with a fully charged battery at 20˚C in semi -auto splicing mode and regular heating mode. The number of cycles may vary depending on the battery status and operating conditions.
OPTIONAL COMPONENTS
Item
P/N
Quantity
❶
Cooling Tray
CTX-02
1
❷
USB Cable
USB-01
1
❸
Battery Pack
S946
1
❹
Tight Holder
16 mm cleave length
S712T-016
1 pair
10 mm cleave length
S712T-010
1 pair
❺
Fiber Holder
160 μm coating diameter fiber
S712S-160
1 pair
250 μm coating diameter fiber
S712S-250
1 pair
500 μm coating diameter fiber
S712S-500
1 pair
900 μm coating diameter fiber
S712S-900
1 pair
❻
Loose Tube Fiber (Left side)
S712S-LT-L
1
Loose Tube Fiber (Right side)
S712S-LT-R
1
❼
SOC
Holders
For Ferrule
Seikoh Giken FC/SC connector (9 mm)
S712C-SGS9-L
1
Seikoh Giken FC/SC connector (5 mm)
S712C-SGS5-L
1
Seikoh Giken LC connector (9 mm)
S712C-SGL9-L
1
Seikoh Giken LC connector (5 mm)
S712C-SGL5-L
1
Seikoh Giken TOUCH Plus SC connector (9mm)
S712C-SGS9C-R
1
Diamond E-2000™/F-3000™ LC/SC connector
S712C-DM25-L
1
For Cordage
Seikoh Giken Cordage (5 mm)
S712C-SGC5-R
1
Seikoh Giken Cordage (9 mm)
S712C-SGC9-R
1
Diamond Cordage (5 mm cleave,
1.8 to 3 mm cordage)
S712C-DMC5-R1
1
❽
Drop/ Indoor Cable Holders
Drop/ Indoor Cable Holder
S712S-1SM-D
1 pair
Low-friction Indoor Cable Holder
S712S-1SM-ST
1 pair
❾
Drop/ Cordage/ 250 to 900 μm Coating Fiber Holder
Fiber and Cordage Common Holder
S712F-CM
1 pair
Smart Fuse
Software Interface for Machine
SF-01
1
ORDERING NUMBER FORM : NJ001- □
Category
Code
Description
□
Holder Type
1
16 mm Tight holder S712T-016
2
10 mm Tight holder S712T-010
3
Fiber Holder System