FTC-200 X-ray Source Controller
The FTC-200 Source Controller powers, controls, and monitors all Moxtek® MAGNUM® miniature x-ray sources. The FTC-200 controller provides input power to the high voltage power supply and allows the operator to adjust the high voltage and emission current settings on the x-ray source.
This controller monitors and displays the power settings applied to the x-ray tube. The FTC-200 Source Controller is robust & reliable, capable of operating all “analog input” tube power supplies currently available at Moxtek.
Applications
X-ray Imaging
■ Medical / Dental
■ Security
■ Material ID
Non-destructive testing
X-ray Fluorescence
X-ray-Diffraction
Features
Benefits
Liquid Crystal Display (LCD)
Displays monitor values for HV, firmware versions, power supply information, and source operating parameters
“Set Point” button
Control the HV
“HV Enable”
Provides capability to interlock the test chamber to remotely control electronics
Computer control capability using RS232 connector
Provides a 5 volt output for triggering detector or shutter electronics
“Filament Ready”
LED Indicates when x-rays are being generated
“X-rays On” safety light feature
Interlock control, external x-ray lamp control, tube AUX power
AUX source connector
Programmable from 7V to 14V @ 3A
Programmable for operating all analog input power supplies currently available at Moxtek
Displays source power supply type
Displays current source status voltage /current monitor and set point
Mechanical Specifications
Power Supply Bias:
0V to ±250V
Input Power:
+/-15V and +5V
Operating Temperature:
-10° to +50° C
Storage Temperature:
-40° to +60° C
Weight:
1 lb. (450g)
Ordering Information
Part Number ns
Controller OptionsOptio
TUB00051-1 FTC-200
Controller (HV Control: -4 to -40kV; Emission Current: 0 to 100 µA
TUB00051-2 FTC-200
Controller (HV Control: -10 to -50kV; Emission Current: 0 to 200 µA
FTC-200 Source Controller Drawing