DE-R 242 Diffractive Optical Element
• Element Number: DE-R 242
• Current Product Revision: B
• Description: Matrix 16 x 16 Dots
• Number of Dots: 256 + 1 Dots
• Substrate material: Polycarbonate (PC)
• Size (Ø x Thickness): 8 x 1.2 mm
• Design wavelengths: 635 nm
• Recommended wavelength range: 530-730 nm
• Minimum recommended beam diameter: 0.5-1 mm
Pattern size and pattern angles and the intensity in the undiffracted central spot ('zero order intensity', see reverse page) will vary most with the wavelength. Within the recommended wavelength range, the element shows the lowest intensity in the central spot. Diffraction efficiencies given on this datasheet have been measured using elements of product revision B.
Geometry and Diffraction Angles
Wavelength
Pattern Size @ 100 mm Distance
Pattern Angles
a
b
c
d
α
β
γ
δ
450 nm
8.8 mm
6.2 mm
0.41 mm
6.2 mm
5.0°
3.6°
0.24°
3.6°
515 nm
10.1 mm
7.1 mm
0.47 mm
7.1 mm
5.8°
4.1°
0.27°
4.1°
532 nm
10.4 mm
7.4 mm
0.49 mm
7.4 mm
6.0°
4.2°
0.28°
4.2°
635 nm
12.4 mm
8.8 mm
0.59 mm
8.8 mm
7.1°
5.0°
0.34°
5.0°
650 nm
12.7 mm
9.0 mm
0.60 mm
9.0 mm
7.3°
5.1°
0.34°
5.1°
730 nm
14.3 mm
10.1 mm
0.67 mm
10.1 mm
8.2°
5.8°
0.39°
5.8°
780 nm
15.3 mm
10.8 mm
0.72 mm
10.8 mm
8.7°
6.2°
0.41°
6.2°
808 nm
15.8 mm
11.2 mm
0.75 mm
11.2 mm
9.1°
6.4°
0.43°
6.4°
Setup
Laser diodes are the most common light source to be used with diffractive optical elements, but other laser light sources may also be used. The DOEs are best used with collimated or convergent laser sources. The microstructure surface should be oriented towards the laser. The 0-order spot is equivalent in size and shape to the original beam, but its power is attenuated.
Diffraction Zero Order Intensity:
Wavelength
0-Order Intensity
448
34%
532
7.7%
594
0.7%
638
0.1%
654
0.4%
687
1.9%
801
10.1%
描述 [描述] Design wavelengths: 635 nm