DE-R 351 Diffractive Optical Element
• Element Number: DE-R 351
• Current Product Revision: A
• Description: Matrix 10 x 10 Dots
• Number of Dots: 100 Dots
• Substrate Material: Polycarbonate (PC)
• Size (Ø x Thickness): 8 x 1.2 mm
• Design Wavelengths: 532 nm
• Recommended Wavelength Range: 510-600 nm
• Minimum Recommended Beam Diameter: 0.5-1 mm
Pattern size and pattern angles and the intensity in the undiffracted central spot ('zero order intensity', see reverse page) will vary most with the wavelength. Within the recommended wavelength range, the zeroth order has a similar power than the off-axis beams of the dot matrix.
Diffraction efficiencies given on this datasheet have been measured using elements of product revision A.
Geometry and Diffraction Angles
Wavelength
Pattern Size @ 100 mm Distance
Pattern Angles
a
b
c
d
α
β
γ
δ
405
31.8 mm
22.5 mm
2.50 mm
22.5 mm
18.1°
12.8°
1.43°
12.8°
450
35.5 mm
25.1 mm
2.79 mm
25.1 mm
20.1°
14.3°
1.59°
14.3°
488
38.56 mm
27.3 mm
3.03 mm
27.3 mm
21.8°
15.5°
1.73°
15.5°
515
40.8 mm
28.8 mm
3.20 mm
28.8 mm
23.1°
16.4°
1.82°
16.4°
532
42.2 mm
29.8 mm
3.32 mm
29.8 mm
23.8°
14.0°
1.89°
14.0°
635
50.8 mm
36.0 mm
4.00 mm
36.0 mm
28.5°
20.4°
2.26°
20.4°
650
52.1 mm
36.9 mm
4.10 mm
36.9 mm
29.2°
20.9°
2.32°
20.9°
730
59.1 mm
41.8 mm
4.64 mm
41.8 mm
32.9°
23.6°
2.62°
23.6°
780
63.5 mm
44.9 mm
4.99 mm
44.9 mm
35.2°
25.3°
2.81°
25.3°
808
66.0 mm
46.7 mm
5.19 mm
46.7 mm
36.5°
26.3°
2.92°
26.3°
Setup
Laser diodes are the most common light source to be used with diffractive optical elements, but other laser light sources may also be used.
The DOEs are best used with collimated or convergent laser sources. The microstructure surface should be oriented towards the laser.
The 0-order spot is equivalent in size and shape to the original beam, but its power is attenuated.
Diffraction Zero Order Intensity:
描述 [描述] Design Wavelengths: 532 nm