X-NA-E Series: Micro linear actuators with built-in controllers and motor encoders
Series Overview
25 and 50 mm travel
Up to 30 mm/s speed and up to 25 N thrust
Built-in controller; daisy-chains with other Zaber products
Built-in, 250 CPR, motor encoder provides slip/stall detection and recovery
Designed to replace standard micrometer heads on manual translation stages
Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
Zaber's X-NA-E Series devices are computer-controlled, motorized linear actuators with high thrust and speed capabilities and a compact size. They are stand-alone units requiring only a standard 24 V or 48 V power supply. The built-in motor encoder allows closed-loop operation and slip/stall recovery features. An optional indexed knob provides convenient manual control for versatile operation even without a computer.
These actuators connect to the RS-232 port or USB port of any computer, and they can be daisy-chained with any other Zaber products. The daisy-chain also shares power, making it possible for multiple X-Series products to share a single power supply. Convenient locking, 4-pin, M8 connectors on the unit allow for secure connection between units. At only 20 mm high, these miniature actuators are excellent for applications where a small profile is required. Like all of Zaber's products, the X-NA-E Series is designed to be 'plug and play' and very easy to set up and operate.
Zaber's positioners with built-in controllers, stand-alone controllers, and joysticks are divided into three series: the T-Series, the A-Series, and the X-Series.
Part Numbering Scheme
Specification
Specification Value Alternate Unit Microstep Size (Default Resolution)
0.047625 µm
Built-in Controller
Yes
Repeatability
< 1 µm
< 0.000039 "
Backlash
< 15 µm
< 0.000591 "
Maximum Speed
30 mm/s
1.181 "/s
Minimum Speed
0.000029 mm/s
0.000001 "/s
Speed Resolution
0.000029 mm/s
0.000001 "/s
Encoder Resolution
250 CPR
1000 states/rev
Encoder Type
Rotary quadrature encoder
Peak Thrust
25 N
5.6 lb
Communication Interface
RS-232
Communication Protocol
Zaber ASCII (Default), Zaber Binary
Maximum Current Draw
180 mA
Power Supply
24-48 VDC
Power Plug
2-pin screw terminal
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Motor Rated Current
240 mA/phase
Inductance
1.5 mH/phase
Default Resolution
1/64 of a step
Data Cable Connection
Locking 4-pin M8
Mechanical Drive System
Precision lead screw
Limit or Home Sensing
Magnetic hall sensor
Axes of Motion
1
LED Indicators
Yes
Mounting Interface
3/8-32 nut, 3/8" shank, or M3 screws
Operating Temperature Range
0 to 50 °C
Vacuum Compatible
No
RoHS Compliant
Yes
CE Compliant
Yes
Comparison - X-NA-E Series
Part Number Travel Range Accuracy (unidirectional) Manual Control Weight X-NA08A25-E09
25.4 mm (1.000 ")
40 µm (0.001575 ")
Yes
0.18 kg (0.397 lb)
X-NA08A25-SE09
25.4 mm (1.000 ")
40 µm (0.001575 ")
No
0.18 kg (0.397 lb)
X-NA08A50-E09
50.8 mm (2.000 ")
55 µm (0.002165 ")
Yes
0.20 kg (0.441 lb)
X-NA08A50-SE09
50.8 mm (2.000 ")
55 µm (0.002165 ")
No
0.20 kg (0.441 lb)
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
商品属性 [行程] 25 and 50 mm