T-NA Series: Micro linear actuators with built-in controllers
25 and 50 mm travel
Up to 8 mm/s speed and up to 50 N thrust
Our most compact, precise and robust actuators with built-in controllers
Built-in controller; daisy-chains data and power with other T-Series products
Designed to replace standard micrometer heads on manual translation stages
Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
Zaber's positioners with built-in controllers, stand-alone controllers, and joysticks are divided into three series: the T-Series, the A-Series, and the X-Series.
Part Numbering Scheme
Specification Value Alternate Unit Microstep Size (Default Resolution)
0.047625 µm
Built-in Controller
Yes
Repeatability
< 1 µm
< 0.000039 "
Backlash
< 15 µm
< 0.000591 "
Maximum Speed
8 mm/s
0.315 "/s
Minimum Speed
0.000446 mm/s
0.000018 "/s
Speed Resolution
0.000446 mm/s
0.000018 "/s
Encoder Type
None
Peak Thrust
50 N
11.2 lb
Maximum Continuous Thrust
50 N
11.2 lb
Communication Interface
RS-232
Communication Protocol
Zaber Binary
Maximum Current Draw
350 mA
Power Supply
12-16 VDC
Power Plug
2.1 mm center positive
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Inductance
1.5 mH/phase
Default Resolution
1/64 of a step
Data Cable Connection
Minidin 6
Mechanical Drive System
Precision lead screw
Limit or Home Sensing
Magnetic hall sensor
Axes of Motion
1
LED Indicators
Yes, Bi-colour
Mounting Interface
3/8-32 nut, 3/8" shank, or M3 screws
Operating Temperature Range
0 to 50 °C
Vacuum Compatible
No
RoHS Compliant
Yes
CE Compliant
Yes
Comparison - T-NA Series
Part Number Travel Range Accuracy (unidirectional) Manual Control Weight T-NA08A25
25.4 mm (1.000 ")
40 µm (0.001575 ")
Yes
0.13 kg (0.287 lb)
T-NA08A25-S
25.4 mm (1.000 ")
40 µm (0.001575 ")
No
0.13 kg (0.287 lb)
T-NA08A50
50.8 mm (2.000 ")
55 µm (0.002165 ")
Yes
0.15 kg (0.331 lb)
T-NA08A50-S
50.8 mm (2.000 ")
55 µm (0.002165 ")
No
0.15 kg (0.331 lb)
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
商品属性 [行程] 25 and 50 mm