X-BLQ-E Series: Closed-loop, belt-driven linear stages with built-in stepper motors, motor encoders, and controllers
70 to 3000 mm travel
Up to 2.0 m/s speed, 55 N thrust, and 20 kg load capacity
Encoder position feedback with slip/stall detection and automatic recovery
Built-in controller; daisy-chains with any other Zaber products
Zaber's X-BLQ-E Series products are computer controlled, belt-driven linear stages with integrated stepper motors and controllers. A built-in motor encoder allows closed-loop operation with slip/stall recovery features. They are stand-alone devices requiring only a standard 48 V power supply for operation.
An indexed knob provides convenient manual control for versatile operation even without a computer. These stages connect to the RS-232 port or USB port of any computer, and they can be daisy-chained with any other Zaber products. The daisy-chain also shares power, making it possible for multiple X-Series products to share a single power supply. Convenient locking, 4-pin, M8 connectors on the unit allow for secure connection between devices.
With travel lengths up to 3 m, 20 µm repeatability, and a maximum speed of 2.0 m/s, X-BLQ-E stages are perfect for rapid positioning over large distances. Like all of Zaber's products, the X-BLQ-E Series is designed to be 'plug and play' and very easy to set up and operate.
Zaber's positioners with built-in controllers, stand-alone controllers, and joysticks are divided into three series: the T-Series, the A-Series, and the X-Series.
Part Numbering Scheme
Specification Value Alternate Unit Microstep Size (Default Resolution)
4.21875 µm
Built-in Controller
Yes
Repeatability
< 20 µm
< 0.000787 "
Backlash
< 75 µm
< 0.002953 "
Minimum Speed
0.002576 mm/s
0.000101 "/s
Speed Resolution
0.002576 mm/s
0.000101 "/s
Encoder Resolution
500 CPR
2000 states/rev
Encoder Type
Rotary quadrature encoder
Peak Thrust
55 N
12.3 lb
Maximum Continuous Thrust
20 N
4.5 lb
Communication Interface
RS-232
Communication Protocol
Zaber ASCII (Default), Zaber Binary
Maximum Centered Load
200 N
44.9 lb
Maximum Cantilever Load
1500 N⋅cm
2124.2 oz⋅in
Guide Type
Recirculating Ball Linear Guide
Vertical Runout
< 30 µm
< 0.001181 "
Maximum Current Draw
1800 mA
Power Supply
24-48 VDC
Linear Motion Per Motor Rev
54 mm
2.126 "
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Motor Rated Current
2300 mA/phase
Inductance
2.2 mH/phase
Default Resolution
1/64 of a step
Data Cable Connection
Locking 4-pin M8
Mechanical Drive System
Synchronous belt
Limit or Home Sensing
Magnetic home sensor
Manual Control
Indexed knob with push switch
Axes of Motion
1
Mounting Interface
M6 threaded holes and 8-32 threaded holes
Operating Temperature Range
0 to 50 °C
Vacuum Compatible
No
RoHS Compliant
Yes
Stage Parallelism
< 100 µm
< 0.003937 "
CE Compliant
Yes
Comparison - X-BLQ-E Series
Part Number Travel Range Accuracy (unidirectional) Maximum Speed Horizontal Runout X-BLQ0070-E01
70 mm (2.756 ")
200 µm (0.007874 ")
1100 mm/s (43.307 "/s)
< 20 µm (< 0.000787 ")
X-BLQ0145-E01
145 mm (5.709 ")
200 µm (0.007874 ")
1600 mm/s (62.992 "/s)
< 30 µm (< 0.001181 ")
X-BLQ0295-E01
295 mm (11.614 ")
300 µm (0.011811 ")
2000 mm/s (78.740 "/s)
< 35 µm (< 0.001378 ")
X-BLQ0445-E01
445 mm (17.520 ")
400 µm (0.015748 ")
2000 mm/s (78.740 "/s)
< 40 µm (< 0.001575 ")
X-BLQ0595-E01
595 mm (23.425 ")
500 µm (0.019685 ")
2000 mm/s (78.740 "/s)
< 60 µm (< 0.002362 ")
X-BLQ1045-E01
1045 mm (41.142 ")
700 µm (0.027559 ")
2000 mm/s (78.740 "/s)
< 60 µm (< 0.002362 ")
X-BLQ1495-E01
1495 mm (58.858 ")
1100 µm (0.043307 ")
2000 mm/s (78.740 "/s)
X-BLQ2095-E01
2095 mm (82.480 ")
1500 µm (0.059055 ")
2000 mm/s (78.740 "/s)
X-BLQ3000-E01
3000 mm (118.110 ")
2200 µm (0.086614 ")
2000 mm/s (78.740 "/s)
Part Number Weight X-BLQ0070-E01
1.7 kg (3.748 lb)
X-BLQ0145-E01
1.85 kg (4.079 lb)
X-BLQ0295-E01
2.15 kg (4.740 lb)
X-BLQ0445-E01
2.5 kg (5.512 lb)
X-BLQ0595-E01
2.75 kg (6.063 lb)
X-BLQ1045-E01
3.75 kg (8.267 lb)
X-BLQ1495-E01
4.7 kg (10.362 lb)
X-BLQ2095-E01
6 kg (13.228 lb)
X-BLQ3000-E01
7.8 kg (17.196 lb)
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
商品属性 [行程] 70 to 3000 mm