X-LSM-E Series: Miniature motorized linear stages with built-in motor encoder and controllers
25, 50, 100, 150, 200 mm travel
Up to 104 mm/s speed and up to 55 N thrust
10 kg load capacity
Built-in controller; daisy-chains with other Zaber products
Integrated, 200 CPR, motor mounted encoder provides slip/stall detection and recovery
Zaber's X-LSM-E Series devices are computer-controlled, motorized linear stages with high thrust and speed capabilities and a compact size. They are stand-alone units requiring only a standard 24 V or 48 V power supply. The built-in motor encoder allows closed-loop operation and slip/stall recovery features. An optional indexed knob provides convenient manual control for versatile operation even without a computer.
These stages connect to the RS-232 port or USB port of any computer, and they can be daisy-chained with any other Zaber products. The daisy-chain also shares power, making it possible for multiple X-Series products to share a single power supply. Convenient locking, 4-pin, M8 connectors on the unit allow for secure connection between units.
At only 21 mm high, these miniature stages are excellent for applications where a small profile is required. The X-LSM-E's innovative design allows speeds up to 104 mm/s and loads up to 10 kg. Like all of Zaber's products, the X-LSM-E Series is designed to be 'plug and play' and very easy to set up and operate. If you are considering a multi-axis system, in the XY configuration, these stages make excellent microscope stages. Adding an X-JOY3 joystick controller allows manual control of both X and Y or XYZ axes from a single interface as well as allowing microscope stage positions to be saved and recalled at the touch of a button.
Zaber's positioners with built-in controllers, stand-alone controllers, and joysticks are divided into three series: the T-Series, the A-Series, and the X-Series.
Part Numbering Scheme
Specification Value Alternate Unit Built-in Controller
Yes
Encoder Resolution
200 CPR
800 states/rev
Encoder Type
Rotary quadrature encoder
Maximum Continuous Thrust
25 N
5.6 lb
Communication Interface
RS-232
Communication Protocol
Zaber ASCII (Default), Zaber Binary
Maximum Centered Load
100 N
22.4 lb
Maximum Cantilever Load
300 N⋅cm
424.8 oz⋅in
Guide Type
Needle roller bearing
Stiffness in Pitch
55 N⋅m/°
317 µrad/N⋅m
Stiffness in Roll
52.5 N⋅m/°
332 µrad/N⋅m
Stiffness in Yaw
85 N⋅m/°
205 µrad/N⋅m
Maximum Current Draw
350 mA
Power Supply
24-48 VDC
Power Plug
2-pin Screw Terminal
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Motor Rated Current
600 mA/phase
Inductance
3.5 mH/phase
Default Resolution
1/64 of a step
Data Cable Connection
Locking 4-pin M8
Mechanical Drive System
Precision lead screw
Limit or Home Sensing
Magnetic hall sensor
Axes of Motion
1
LED Indicators
Yes
Mounting Interface
M3 and M6 threaded holes and M4 threaded centre hole
Operating Temperature Range
0 to 50 °C
Vacuum Compatible
No
RoHS Compliant
Yes
Stage Parallelism
< 25 µm
< 0.000984 "
CE Compliant
Yes
Comparison - X-LSM-E Series
Part Number Microstep Size (Default Resolution) Travel Range Accuracy (unidirectional) Repeatability X-LSM025A-E03
0.047625 µm
25.4 mm (1.000 ")
15 µm (0.000591 ")
< 3 µm (< 0.000118 ")
X-LSM025A-SE03
0.047625 µm
25.4 mm (1.000 ")
15 µm (0.000591 ")
< 3 µm (< 0.000118 ")
X-LSM025B-E03
0.1905 µm
25.4 mm (1.000 ")
15 µm (0.000591 ")
< 6 µm (< 0.000236 ")
X-LSM025B-SE03
0.1905 µm
25.4 mm (1.000 ")
15 µm (0.000591 ")
< 6 µm (< 0.000236 ")
X-LSM050A-E03
0.047625 µm
50.8 mm (2.000 ")
20 µm (0.000787 ")
< 3 µm (< 0.000118 ")
X-LSM050A-SE03
0.047625 µm
50.8 mm (2.000 ")
20 µm (0.000787 ")
< 3 µm (< 0.000118 ")
X-LSM050B-E03
0.1905 µm
50.8 mm (2.000 ")
25 µm (0.000984 ")
< 6 µm (< 0.000236 ")
X-LSM050B-SE03
0.1905 µm
50.8 mm (2.000 ")
25 µm (0.000984 ")
< 6 µm (< 0.000236 ")
X-LSM100A-E03
0.047625 µm
101.6 mm (4.000 ")
35 µm (0.001378 ")
< 3 µm (< 0.000118 ")
X-LSM100A-SE03
0.047625 µm
101.6 mm (4.000 ")
35 µm (0.001378 ")
< 3 µm (< 0.000118 ")
X-LSM100B-E03
0.1905 µm
101.6 mm (4.000 ")
45 µm (0.001772 ")
< 6 µm (< 0.000236 ")
X-LSM100B-SE03
0.1905 µm
101.6 mm (4.000 ")
45 µm (0.001772 ")
< 6 µm (< 0.000236 ")
X-LSM150A-E03
0.047625 µm
152.4 mm (6.000 ")
50 µm (0.001968 ")
< 3 µm (< 0.000118 ")
X-LSM150A-SE03
0.047625 µm
152.4 mm (6.000 ")
50 µm (0.001968 ")
< 3 µm (< 0.000118 ")
X-LSM150B-E03
0.1905 µm
152.4 mm (6.000 ")
65 µm (0.002559 ")
< 6 µm (< 0.000236 ")
X-LSM150B-SE03
0.1905 µm
152.4 mm (6.000 ")
65 µm (0.002559 ")
< 6 µm (< 0.000236 ")
X-LSM200A-E03
0.047625 µm
203.2 mm (8.000 ")
60 µm (0.002362 ")
< 3 µm (< 0.000118 ")
X-LSM200A-SE03
0.047625 µm
203.2 mm (8.000 ")
60 µm (0.002362 ")
< 3 µm (< 0.000118 ")
X-LSM200B-E03
0.1905 µm
203.2 mm (8.000 ")
85 µm (0.003346 ")
< 6 µm (< 0.000236 ")
X-LSM200B-SE03
0.1905 µm
203.2 mm (8.000 ")
85 µm (0.003346 ")
< 6 µm (< 0.000236 ")
Part Number Backlash Maximum Speed Minimum Speed Speed Resolution X-LSM025A-E03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM025A-SE03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM025B-E03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM025B-SE03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM050A-E03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM050A-SE03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM050B-E03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM050B-SE03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM100A-E03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM100A-SE03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM100B-E03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM100B-SE03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM150A-E03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM150A-SE03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM150B-E03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM150B-SE03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM200A-E03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM200A-SE03
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
X-LSM200B-E03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
X-LSM200B-SE03
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
Part Number Peak Thrust Vertical Runout Horizontal Runout Pitch X-LSM025A-E03
55 N (12.3 lb)
< 8 µm (< 0.000315 ")
< 12 µm (< 0.000472 ")
0.02 ° (0.349 mrad)
X-LSM025A-SE03
55 N (12.3 lb)
< 8 µm (< 0.000315 ")
< 12 µm (< 0.000472 ")
0.02 ° (0.349 mrad)
X-LSM025B-E03
25 N (5.6 lb)
< 8 µm (< 0.000315 ")
< 12 µm (< 0.000472 ")
0.02 ° (0.349 mrad)
X-LSM025B-SE03
25 N (5.6 lb)
< 8 µm (< 0.000315 ")
< 12 µm (< 0.000472 ")
0.02 ° (0.349 mrad)
X-LSM050A-E03
55 N (12.3 lb)
< 11 µm (< 0.000433 ")
< 14 µm (< 0.000551 ")
0.03 ° (0.523 mrad)
X-LSM050A-SE03
55 N (12.3 lb)
< 11 µm (< 0.000433 ")
< 14 µm (< 0.000551 ")
0.03 ° (0.523 mrad)
X-LSM050B-E03
25 N (5.6 lb)
< 11 µm (< 0.000433 ")
< 14 µm (< 0.000551 ")
0.03 ° (0.523 mrad)
X-LSM050B-SE03
25 N (5.6 lb)
< 11 µm (< 0.000433 ")
< 14 µm (< 0.000551 ")
0.03 ° (0.523 mrad)
X-LSM100A-E03
55 N (12.3 lb)
< 18 µm (< 0.000709 ")
< 18 µm (< 0.000709 ")
0.04 ° (0.698 mrad)
X-LSM100A-SE03
55 N (12.3 lb)
< 18 µm (< 0.000709 ")
< 18 µm (< 0.000709 ")
0.04 ° (0.698 mrad)
X-LSM100B-E03
25 N (5.6 lb)
< 18 µm (< 0.000709 ")
< 18 µm (< 0.000709 ")
0.04 ° (0.698 mrad)
X-LSM100B-SE03
25 N (5.6 lb)
< 18 µm (< 0.000709 ")
< 18 µm (< 0.000709 ")
0.04 ° (0.698 mrad)
X-LSM150A-E03
55 N (12.3 lb)
< 25 µm (< 0.000984 ")
< 23 µm (< 0.000906 ")
0.04 ° (0.698 mrad)
X-LSM150A-SE03
55 N (12.3 lb)
< 25 µm (< 0.000984 ")
< 23 µm (< 0.000906 ")
0.04 ° (0.698 mrad)
X-LSM150B-E03
25 N (5.6 lb)
< 25 µm (< 0.000984 ")
< 23 µm (< 0.000906 ")
0.04 ° (0.698 mrad)
X-LSM150B-SE03
25 N (5.6 lb)
< 25 µm (< 0.000984 ")
< 23 µm (< 0.000906 ")
0.04 ° (0.698 mrad)
X-LSM200A-E03
55 N (12.3 lb)
< 32 µm (< 0.001260 ")
< 27 µm (< 0.001063 ")
0.04 ° (0.698 mrad)
X-LSM200A-SE03
55 N (12.3 lb)
< 32 µm (< 0.001260 ")
< 27 µm (< 0.001063 ")
0.04 ° (0.698 mrad)
X-LSM200B-E03
25 N (5.6 lb)
< 32 µm (< 0.001260 ")
< 27 µm (< 0.001063 ")
0.04 ° (0.698 mrad)
X-LSM200B-SE03
25 N (5.6 lb)
< 32 µm (< 0.001260 ")
< 27 µm (< 0.001063 ")
0.04 ° (0.698 mrad)
商品属性 [行程] 25, 50, 100, 150, 200 mm [负载] 10kg