LDQ-AE Series: High precision linear motor stages, with Auto Detect
75, 150, 300, 450, 600 and 1000 mm travel
Up to 1.5 m/s speed, 35 N continuous thrust
Minimum incremental move of 25 nm
Integrated linear encoder provides high accuracy closed loop servo positioning
Designed for use with an X-MCC Series controller for coordinated motion
Capable of providing peak thrust of 95 N when paired with X-MCC
With Auto Detect, the X-MCC controller configures its settings automatically for the connected peripheral
Technical Article - Linear Motors: Overview and Selection Process
Zaber's LDQ-AE Series devices are motorized linear motor stages with high precision and speed capabilities. The built-in linear encoder allows closed-loop servo positioning. The LDQ-AE's innovative design allows speeds up to 1.5 m/s and a minimum incremental move of 25 nm.
The stages are designed to connect directly to our X-MCC using a single cable. Set-up is easy with Auto Detect. Once connected, the X-MCC controller will automatically detect and configure the LDQ-AE.
Part Numbering Scheme
Specification Value Alternate Unit Built-in Controller
No
Recommended Controller
X-MCC (48 V) Recommended
Accuracy (unidirectional)
2.5 µm
0.000098 "
Repeatability
< 0.3 µm
< 0.000012 "
Minimum Incremental Move
25 nm
Maximum Speed
1500 mm/s
59.055 "/s
Maximum Acceleration
19.62 m/s2
2.00 g
Minimum Speed
0.000001 mm/s
0.000000 "/s
Speed Resolution
0.000001 mm/s
0.000000 "/s
Encoder Count Size
1 nm
Encoder Type
Linear analog encoder
Peak Thrust
95 N
21.3 lb
Maximum Continuous Thrust
35 N
7.8 lb
Maximum Centered Load
200 N
44.9 lb
Maximum Cantilever Load
3000 N⋅cm
4248.4 oz⋅in
Guide Type
Recirculating Ball Linear Guide
Stiffness in Pitch
8000 N⋅m/°
2 µrad/N⋅m
Stiffness in Roll
3800 N⋅m/°
5 µrad/N⋅m
Stiffness in Yaw
4000 N⋅m/°
4 µrad/N⋅m
Motor Type
Moving Coil Linear Motor
Force Constant
12.9 N/A
2.9 lbs/A
Motor Rated Current
2400 mA/phase
Motor Winding Resistance
6.4 ohms/phase
Inductance
1.24 mH/phase
Limit or Home Sensing
Optical Index Mark
Axes of Motion
1
Mounting Interface
M6 threaded holes
Operating Temperature Range
0 to 50 °C
Vacuum Compatible
No
RoHS Compliant
Yes
CE Compliant
Yes
Moving Mass
1.5 kg
3.300 lbs
Comparison - LDQ-AE Series
Part Number Travel Range Vertical Runout Horizontal Runout Pitch LDQ0075C-AE53T10A
75 mm (2.953 ")
< 20 µm (< 0.000787 ")
< 6 µm (< 0.000236 ")
0.008 ° (0.140 mrad)
LDQ0150C-AE53T10A
150 mm (5.905 ")
< 25 µm (< 0.000984 ")
< 12 µm (< 0.000472 ")
0.0015 ° (0.026 mrad)
LDQ0300C-AE53T10A
300 mm (11.811 ")
< 35 µm (< 0.001378 ")
< 25 µm (< 0.000984 ")
0.03 ° (0.523 mrad)
LDQ0450C-AE53T10A
450 mm (17.716 ")
< 40 µm (< 0.001575 ")
< 30 µm (< 0.001181 ")
0.05 ° (0.873 mrad)
LDQ0600C-AE53T10A
600 mm (23.622 ")
< 45 µm (< 0.001772 ")
< 35 µm (< 0.001378 ")
0.05 ° (0.873 mrad)
LDQ1000C-AE53T10A
1000 mm (39.370 ")
Part Number Roll Yaw Weight LDQ0075C-AE53T10A
0.005 ° (0.087 mrad)
0.02 ° (0.349 mrad)
6.37 kg (14.043 lb)
LDQ0150C-AE53T10A
0.008 ° (0.140 mrad)
0.025 ° (0.436 mrad)
7.27 kg (16.028 lb)
LDQ0300C-AE53T10A
0.015 ° (0.262 mrad)
0.03 ° (0.523 mrad)
9.37 kg (20.657 lb)
LDQ0450C-AE53T10A
0.02 ° (0.349 mrad)
0.035 ° (0.611 mrad)
10.87 kg (23.964 lb)
LDQ0600C-AE53T10A
0.02 ° (0.349 mrad)
0.04 ° (0.698 mrad)
13.2 kg (29.101 lb)
LDQ1000C-AE53T10A
18.6 kg (41.006 lb)
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
商品属性 [行程] 75, 150, 300, 450, 600 and 1000 mm