LSM Series: Miniature motorized linear stages and Auto Detect
25, 50, 100, 150 and 200 mm travel
10 kg load capacity and up to 104 mm/s speed
Very low profile at only 21 mm stage height
Can be mounted in XY and XYZ configurations
Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
With Auto Detect, the X-MCC controller configures its settings automatically for the connected peripheral
Zaber's LSM Series devices are motorized linear stages with high thrust and speed capabilities and a very compact size. They are designed to interface with our X-MCC Series universal motor controllers, offering high resolution daisy-chainable operation. Set up is easy with Auto Detect. Once connected, the X-MCC controller will automatically detect and configure the LSM.
At only 21 mm high, these miniature stages are excellent for applications where a small profile is required. The LSM's innovative design allows speeds up to 104 mm/s and loads up to 10 kg. The stages can be mounted in XY and XYZ configurations with no additional hardware.
Part Numbering Scheme
Specification Value Alternate Unit Built-in Controller
No
Recommended Controller
X-MCC (48 V) Recommended
Encoder Type
None
Maximum Continuous Thrust
25 N
5.6 lb
Maximum Centered Load
100 N
22.4 lb
Maximum Cantilever Load
300 N⋅cm
424.8 oz⋅in
Guide Type
Needle roller bearing
Stiffness in Pitch
55 N⋅m/°
317 µrad/N⋅m
Stiffness in Roll
52.5 N⋅m/°
332 µrad/N⋅m
Stiffness in Yaw
85 N⋅m/°
205 µrad/N⋅m
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Motor Rated Current
600 mA/phase
Motor Winding Resistance
6.5 ohms/phase
Inductance
3.5 mH/phase
Motor Rated Power
6.9 Watts
Motor Rotor Inertia
2.9 g⋅cm2
Motor Connection
D-sub 15
Default Resolution
1/64 of a step
Motor Frame Size
NEMA 08
Mechanical Drive System
Precision lead screw
Limit or Home Sensing
Magnetic hall sensor
Axes of Motion
1
Mounting Interface
M3 and M6 threaded holes and M4 threaded center hole
Operating Temperature Range
0 to 50 °C
Vacuum Compatible
No
RoHS Compliant
Yes
Stage Parallelism
< 25 µm
< 0.000984 "
CE Compliant
Yes
Comparison - LSM Series
Part Number Microstep Size (Default Resolution) Travel Range Accuracy (unidirectional) Repeatability LSM025A-T4A
0.047625 µm
25.4 mm (1.000 ")
15 µm (0.000591 ")
< 3 µm (< 0.000118 ")
LSM025B-T4A
0.1905 µm
25.4 mm (1.000 ")
15 µm (0.000591 ")
< 6 µm (< 0.000236 ")
LSM050A-T4A
0.047625 µm
50.8 mm (2.000 ")
20 µm (0.000787 ")
< 3 µm (< 0.000118 ")
LSM050B-T4A
0.1905 µm
50.8 mm (2.000 ")
25 µm (0.000984 ")
< 6 µm (< 0.000236 ")
LSM100A-T4A
0.047625 µm
101.6 mm (4.000 ")
35 µm (0.001378 ")
< 3 µm (< 0.000118 ")
LSM100B-T4A
0.1905 µm
101.6 mm (4.000 ")
45 µm (0.001772 ")
< 6 µm (< 0.000236 ")
LSM150A-T4A
0.047625 µm
152.4 mm (6.000 ")
50 µm (0.001968 ")
< 3 µm (< 0.000118 ")
LSM150B-T4A
0.1905 µm
152.4 mm (6.000 ")
65 µm (0.002559 ")
< 6 µm (< 0.000236 ")
LSM200A-T4A
0.047625 µm
203.2 mm (8.000 ")
60 µm (0.002362 ")
< 3 µm (< 0.000118 ")
LSM200B-T4A
0.1905 µm
203.2 mm (8.000 ")
85 µm (0.003346 ")
< 6 µm (< 0.000236 ")
Part Number Backlash Maximum Speed Minimum Speed Speed Resolution LSM025A-T4A
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
LSM025B-T4A
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
LSM050A-T4A
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
LSM050B-T4A
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
LSM100A-T4A
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
LSM100B-T4A
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
LSM150A-T4A
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
LSM150B-T4A
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
LSM200A-T4A
< 12 µm (< 0.000472 ")
26 mm/s (1.024 "/s)
0.000029 mm/s (0.000001 "/s)
0.000029 mm/s (0.000001 "/s)
LSM200B-T4A
< 16 µm (< 0.000630 ")
104 mm/s (4.094 "/s)
0.000116 mm/s (0.000005 "/s)
0.000116 mm/s (0.000005 "/s)
Part Number Peak Thrust Vertical Runout Horizontal Runout Pitch LSM025A-T4A
55 N (12.3 lb)
< 8 µm (< 0.000315 ")
< 12 µm (< 0.000472 ")
0.02 ° (0.349 mrad)
LSM025B-T4A
25 N (5.6 lb)
< 8 µm (< 0.000315 ")
< 12 µm (< 0.000472 ")
0.02 ° (0.349 mrad)
LSM050A-T4A
55 N (12.3 lb)
< 11 µm (< 0.000433 ")
< 14 µm (< 0.000551 ")
0.03 ° (0.523 mrad)
LSM050B-T4A
25 N (5.6 lb)
< 11 µm (< 0.000433 ")
< 14 µm (< 0.000551 ")
0.03 ° (0.523 mrad)
LSM100A-T4A
55 N (12.3 lb)
< 18 µm (< 0.000709 ")
< 18 µm (< 0.000709 ")
0.04 ° (0.698 mrad)
LSM100B-T4A
25 N (5.6 lb)
< 18 µm (< 0.000709 ")
< 18 µm (< 0.000709 ")
0.04 ° (0.698 mrad)
LSM150A-T4A
55 N (12.3 lb)
< 25 µm (< 0.000984 ")
< 23 µm (< 0.000906 ")
0.04 ° (0.698 mrad)
LSM150B-T4A
25 N (5.6 lb)
< 25 µm (< 0.000984 ")
< 23 µm (< 0.000906 ")
0.04 ° (0.698 mrad)
LSM200A-T4A
55 N (12.3 lb)
< 32 µm (< 0.001260 ")
< 27 µm (< 0.001063 ")
0.04 ° (0.698 mrad)
LSM200B-T4A
25 N (5.6 lb)
< 32 µm (< 0.001260 ")
< 27 µm (< 0.001063 ")
0.04 ° (0.698 mrad)
Part Number Roll Yaw Linear Motion Per Motor Rev Weight LSM025A-T4A
0.02 ° (0.349 mrad)
0.03 ° (0.523 mrad)
0.6096 mm (0.024 ")
0.2 kg (0.441 lb)
LSM025B-T4A
0.02 ° (0.349 mrad)
0.03 ° (0.523 mrad)
2.4384 mm (0.096 ")
0.2 kg (0.441 lb)
LSM050A-T4A
0.03 ° (0.523 mrad)
0.03 ° (0.523 mrad)
0.6096 mm (0.024 ")
0.21 kg (0.463 lb)
LSM050B-T4A
0.03 ° (0.523 mrad)
0.03 ° (0.523 mrad)
2.4384 mm (0.096 ")
0.21 kg (0.463 lb)
LSM100A-T4A
0.04 ° (0.698 mrad)
0.04 ° (0.698 mrad)
0.6096 mm (0.024 ")
0.24 kg (0.529 lb)
LSM100B-T4A
0.04 ° (0.698 mrad)
0.04 ° (0.698 mrad)
2.4384 mm (0.096 ")
0.24 kg (0.529 lb)
LSM150A-T4A
0.05 ° (0.873 mrad)
0.05 ° (0.873 mrad)
0.6096 mm (0.024 ")
0.28 kg (0.617 lb)
LSM150B-T4A
0.05 ° (0.873 mrad)
0.05 ° (0.873 mrad)
2.4384 mm (0.096 ")
0.28 kg (0.617 lb)
LSM200A-T4A
0.05 ° (0.873 mrad)
0.05 ° (0.873 mrad)
0.6096 mm (0.024 ")
0.31 kg (0.683 lb)
LSM200B-T4A
0.05 ° (0.873 mrad)
0.05 ° (0.873 mrad)
2.4384 mm (0.096 ")
0.31 kg (0.683 lb)
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
商品属性 [行程] 25, 50, 100, 150 and 200 mm [负载] 10 kg