X-RST Series: High load motorized rotary stages with built-in controllers
50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
50 kg centered load capacity
Speed up to 24 °/s and torque up to 10 N⋅m
Built-in controller; daisy-chains with other Zaber products
Multiple X-Series products in a daisy-chain can share a single power supply
Zaber's X-RST Series products are motorized rotation stages with built-in controllers. Rated for a 50 kg centered load capacity and 10 N⋅m of torque, they are ideal for high load, angular positioning applications.
They are stand-alone units requiring only a standard 24-48 V power supply. An indexed knob provides smooth manual control at variable speeds in both directions for versatile operation even without a computer. Press and hold to switch between velocity mode and position mode, turn to move the stage, and press to stop.
The stages connect to the USB 2.0 or RS-232 port of any computer and can be chained with several units per chain. They can be chained with any other Zaber products. Convenient locking, 4-pin, M8 connectors on the unit allow for easy and secure connection. The chain also shares power, so multiple X-Series products can use a single power supply.
Zaber's positioners with built-in controllers, stand-alone controllers, and joysticks are divided into three series: the T-Series, the A-Series, and the X-Series.
Part Numbering Scheme
Specification Value Alternate Unit Microstep Size (Default Resolution)
0.00015625 °
2.727 µrad
Built-in Controller
Yes
Range
360 °
Accuracy (unidirectional)
0.16 °
2.792000 mrad
Repeatability
< 0.005 °
< 0.087 mrad
Backlash
< 0.05 °
< 0.873 mrad
Maximum Speed
24 °/s
4 rpm
Minimum Speed
0.000095 °/s
1.658 µrad/s
Speed Resolution
0.000095 °/s
1.658 µrad/s
Encoder Type
None
Communication Interface
RS-232
Communication Protocol
Zaber ASCII (Default), Zaber Binary
Maximum Continuous Torque
1000 N⋅cm
1416.1 oz⋅in
Maximum Centered Load
500 N
112.1 lb
Maximum Cantilever Load
2000 N⋅cm
2832.2 oz⋅in
Stage Top Dimension
120 mm
4.724 "
Maximum Current Draw
1100 mA
Power Supply
24-48 VDC
Power Plug
2-pin Screw Terminal
Angular Motion Per Motor Rev
2 °
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Motor Rated Current
1500 mA/phase
Inductance
6.6 mH/phase
Maximum Angular Momentum
0.4 kg⋅m2/s
Default Resolution
1/64 of a step
Data Cable Connection
Locking 4-pin M8
Mechanical Drive System
Precision Worm Gear
Limit or Home Sensing
Magnetic home sensor
Manual Control
Yes
Operating Temperature Range
0-50 °C
Vacuum Compatible
No
RoHS Compliant
Yes
CE Compliant
Yes
Weight
2.4 kg
5.291 lb
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).