X-RSW-SV2 Series: High vacuum motorized rotary stages with built-in controllers
Vacuum compatible to 10-6 Torr
Speed up to 100 °/s and torque up to 100 N⋅cm
20 kg load capacity
Worm gear driven for continuous rotation
Integrated stepper motor controller and motor driver allows for easy-to-use control
Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
For more information about the basics of a vacuum system and considerations to keep in mind when gathering requirements for your application, read our technical article, "Motion Device Design Considerations for Vacuum Applications".
Zaber's X-RSW-SV2 Series devices are high-vacuum compatible, computer-controlled, motorized rotary stages with built-in controllers. They are stand-alone units requiring only a standard 24 - 48 V power supply.
These stages connect to the RS-232 port or USB port of any computer, and they can be daisy-chained with any other Zaber products. The daisy-chain also shares power, making it possible for multiple X-Series products to share a single power supply.
The X-RSW-SV2 is designed with vacuum compatible materials to minimize outgassing and allow for faster pump down times. Like all of Zaber's products, the X-RSW-SV2 Series is designed to be 'plug and play' and very easy to set up and operate.
Zaber's positioners with built-in controllers, stand-alone controllers, and joysticks are divided into three series: the T-Series, the A-Series, and the X-Series.
Part Numbering Scheme
Specification Value Alternate Unit Microstep Size (Default Resolution)
0.000234375 °
4.091 µrad
Built-in Controller
Yes
Range
360 °
Accuracy (unidirectional)
0.14 °
2.443000 mrad
Repeatability
< 0.02 °
< 0.349 mrad
Backlash
< 0.04 °
< 0.698 mrad
Maximum Speed
100 °/s
17 rpm
Minimum Speed
0.000143 °/s
2.496 µrad/s
Speed Resolution
0.000143 °/s
2.496 µrad/s
Encoder Type
None
Communication Interface
RS-232
Communication Protocol
Zaber ASCII (Default), Zaber Binary
Maximum Torque
100 N⋅cm
141.6 oz⋅in
Maximum Centered Load
200 N
44.9 lb
Maximum Cantilever Load
410 N⋅cm
580.6 oz⋅in
Stage Top Dimension
60 mm
2.362 "
Maximum Current Draw
950 mA
Power Supply
24-48 VDC
Power Plug
None, use X-PIB
Angular Motion Per Motor Rev
3 °
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Motor Rated Current
1300 mA/phase
Inductance
1 mH/phase
Default Resolution
1/64 of a step
Data Cable Connection
Teflon flying leads with M8 4 pin M/F
Mechanical Drive System
Precision Worm Gear
Limit or Home Sensing
Magnetic home sensor
Manual Control
No
Operating Temperature Range
0-50 °C
Vacuum Compatible
High vacuum (10-6 Torr)
RoHS Compliant
Yes
CE Compliant
Yes
Weight
0.72 kg
1.587 lb
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).
商品属性 [负载] 20 kg