T-MM-V Series: Low vacuum motorized mirror mounts with built-in controllers
Vacuum compatible to 10-3 Torr
25 and 50 mm travel
Up to 30 mm/s speed and up to 25 N thrust
Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
Our most compact, precise and robust actuator
Designed to replace standard micrometer heads on manual translation stages
Built-in controller; daisy chains with other X-series devices inside vacuum chamber
For more information about the basics of a vacuum system and considerations to keep in mind when gathering requirements for your application, read our technical article, "Motion Device Design Considerations for Vacuum Applications".
See our Vacuum Compatible TSB-V Linear Slides for more information on compatible slides.
Zaber's X-NA-SV1 Series devices are low-vacuum compatible, computer-controlled, motorized miniature linear actuators with high thrust and speed capabilities, and a compact size. They are stand-alone units requiring only a standard 24 V or 48 V power supply.
These actuators connect to the RS-232 port or USB port of any computer, and they can be daisy-chained with any other Zaber products. The daisy-chain also shares power, making it possible for multiple X-Series products to share a single power supply.
At only 20 mm wide, these miniature actuators are excellent for applications where a small profile is required. The X-NA-SV1 is designed with vacuum compatible materials to minimize outgassing and allow for faster pump down times. Like all of Zaber's products, the X-NA-SV1 Series is designed to be 'plug and play' and very easy to set up and operate.
Zaber's positioners with built-in controllers, stand-alone controllers, and joysticks are divided into three series: the T-Series, the A-Series, and the X-Series.
Part Numbering Scheme
Specification Value Alternate Unit Microstep Size (Default Resolution)
0.047625 µm
Built-in Controller
Yes
Repeatability
< 1 µm
< 0.000039 "
Backlash
< 15 µm
< 0.000591 "
Maximum Speed
30 mm/s
1.181 "/s
Minimum Speed
0.000029 mm/s
0.000001 "/s
Speed Resolution
0.000029 mm/s
0.000001 "/s
Encoder Type
None
Peak Thrust
25 N
5.6 lb
Maximum Continuous Thrust
25 N
5.6 lb
Communication Interface
RS-232
Communication Protocol
Zaber ASCII (Default), Zaber Binary
Maximum Current Draw
180 mA
Power Supply
24-48 VDC
Power Plug
None, use X-PIB
Motor Steps Per Rev
200
Motor Type
Stepper (2 phase)
Inductance
1.5 mH/phase
Default Resolution
1/64 of a step
Data Cable Connection
Teflon flying leads with 4-pin M8 M/F
Mechanical Drive System
Precision lead screw
Limit or Home Sensing
Magnetic hall sensor
Axes of Motion
1
Mounting Interface
3/8-32 nut, 3/8" shank, or M3 screws
Operating Temperature Range
0 to 50 °C
Vacuum Compatible
Low vacuum (10-3 Torr)
RoHS Compliant
Yes
CE Compliant
Yes
Comparison - X-NA-SV1 Series
Part Number Travel Range Accuracy (unidirectional) Weight X-NA08A25-SV1
25.4 mm (1.000 ")
40 µm (0.001575 ")
0.156 kg (0.344 lb)
X-NA08A50-SV1
50.8 mm (2.000 ")
55 µm (0.002165 ")
0.176 kg (0.388 lb)
Specification Charts and Notes
Thrust or torque is a function of speed. The values given above are maximums. These values cannot both be achieved simultaneously (i.e. at maximum speed, the unit will not produce maximum thrust).