MXAN1300-LN-20
High optical handling capability O-Band Analog Intensity Modulator
The new MXAN1300-LN-20 modulator design is based on an X-cut crystal etched with an optical waveguide using Annealed Proton Exchange on a selected LiNbO3 substrate. This fabrication method yields outstanding performance with higher optical input power handling capabilities. Indeed, we guarantee operation with as high as 25 dBm CW optical input without photorefractive limitation effects that could affect the optical insertion loss, extinction ratio stability and modulator drift.
Consistent with the performance and requirements of our MXAN modulators family, the MXAN1300-LN-20 is also a linear modulator for demanding analog transmission links in military and civil applications up to 40 GHz. It features low insertion loss for optimal link gain and high linearity in order to preserve the signal quality.
The MXAN1300-LN-20 is therefore the best candidate for high output power modulated signal solutions using LiNbO3 waveguide technology. It is especially suitable for microwave links and remote antennas as well as overload receiver tests for the data-com market and modulation schemes such as NRZ-44 Gb/s and PAM4-28 Gbauds.
FEATURES
• High linearity
• Bandwidth > 20 GHz
• High optical stability vs optical power
• Low insertion loss
• High optical input power capability
APPLICATIONS
• RFoF
• Antenna remoting
• Microwave and Radar links
• Overload receiver test
RELATED EQUIPMENTS
• Digital and linear RF amplifiers
• MBC Bias Controllers
• VNA, NRZ, PAM Reference Transmitters
MXAN1300-LN-20 Perfomance Highlights
Parameter
Min
Typ
Max
Unit
Operating wavelength
1260
1310
1350
nm
Insertion loss
-
4
5.5
dB
Electro-optical bandwidth
20
25
-
GHz
Vp RF @50 kHz
-
5.5
-
V
Specifications given at 25 °C, 50 W, 1310 nm
MXAN1300-LN-20
20 GHz Analog Intensity Modulator
Electrical Characteristics
50 W RF input
Optical Characteristics
All specifications given at 25°C, 1310 nm, unless differently specified
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability
Mechanical Diagram and Pinout
All measurements in mm
Ordering information
MXAN1300-LN-20-00-Y-Z-AB-CD
00 = No integrated PD
Y = Input fiber : P Polarization maintaining
Z = Output fiber : P Polarization maintaining
AB = Input connector : 00 bare fiber FA FC/APC FC FC/SPC
CD = Output connector : 00 bare fiber FA FC/APC FC FC/SPC
商品属性 [操作波长] 1260- 1350nm [带宽] 25GHz [插入损耗] 4dB