SWEPT, TUNABLE, CONTINUOUS WAVE (CW) LASER SOURCE
EPIQ-Laser uses a high quality grating paired with state-of-the-art micro-electromechanics tuning mechanism for quick, voltage-controlled wavelength tuning and exceptional reliability.
With 0.01 dB power stability and 400 nm/s high-speed scan rate, it is the perfect time-saving tool for R&D applications as well as production testing.
High power stability
Highly stable output power ensures accurate and consistent test and measurement results.
No moving bulk optics
State-of-the-art MEMS technology and no moving bulk optics offer reliable wavelength tuning.
Fine tuning resolution
Set the exact wavelength you need with epIQ-Laser’s precision microelectromechanics tuning.
Trigger at the start of each scan
The trigger output from the laser allows synchronization to the start and stop of each wavelength sweep
Fast sweep speed
Save time on your DUT characterization or speed up your measurement with epIQ-Laser’s rapid sweep speed.
Swept or step-tuning modes
Intuitive software GUI makes it simple to configure the epIQ-Laser in fixed, continuous or step tuning modes
Analog power output
Provides a real-time reference of the laser’s power output for an easy integration into automated test set-ups.
Wide coverage of wavelength options
Choose from a wide range of operating wavelength ranges to suit your specific application.
Instrument dimensions
Rear panel connections
TARGET APPLICATIONS
- Optical component characterization
- High density fiber-optic sensor interrogation
- Biomedical imaging applications
General Specifications
1001
1002
1003
Operating wavelength range 1
1260 to 1340 nm
1260 to 1420 nm
1520 to 1580 nm
Output power (one port)
≥ 5 mW
≥ 2 mW
≥ 10 mW
Power stability 2
± 0.01 dB
± 0.01 dB
± 0.01 dB
Power repeatability 3
≤ ± 0.05 dB
≤ ± 0.05 dB
≤ ± 0.05 dB
Wavelength stability 2
≤ ± 10 pm
≤ ± 10 pm
≤ ± 10 pm
Wavelength tuning resolution
≤ 10 pm
≤ 10 pm
≤ 10 pm
Signal to Source ASE Ratio 4
≥ 60 dB
≥ 60 dB
≥ 60 dB
Linewidth (FWHM)
18 to 53 GHz
18 to 53 GHz
≤ 53 GHz
Step tuning time
50 ms
50 ms
50 ms
Maximum sweep speed
400 nm/s
400 nm/s
400 nm/s
Power supply
110/220 V; 50/60 Hz; 60 W
110/220 V; 50/60 Hz; 60 W
110/220 V; 50/60 Hz; 60 W
Trigger output (BNC)
4 V pulse during sweep, 0 V when sweep has completed
4 V pulse during sweep, 0 V when sweep has completed
4 V pulse during sweep, 0 V when sweep has completed
Analog power output (BNC)
0 to 4 V linearly proportional to laser power in mW
0 to 4 V linearly proportional to laser power in mW
0 to 4 V linearly proportional to laser power in mW
General Specifications
1004
1005
1006
Operating wavelength range 1
1260 to 1340 nm
1260 to 1420 nm
1520 to 1580 nm
Output power (one port)
≥ 5 mW
≥ 2 mW
≥ 10 mW
Power stability 2
± 0.01 dB
± 0.01 dB
± 0.01 dB
Power repeatability 3
≤ ± 0.05 dB
≤ ± 0.05 dB
≤ ± 0.05 dB
Wavelength stability 2
≤ ± 10 pm
≤ ± 10 pm
≤ ± 10 pm
Wavelength tuning resolution
≤ 10 pm
≤ 10 pm
≤ 10 pm
Signal to Source ASE Ratio 4
≥ 60 dB
≥ 60 dB
≥ 60 dB
Linewidth (FWHM)
< 200 MHz
< 200 MHz
< 200 MHz
Step tuning time
50 ms
50 ms
50 ms
Maximum sweep speed
120 nm/s
120 nm/s
120 nm/s
Power supply
110/220 V; 50/60 Hz; 60 W
110/220 V; 50/60 Hz; 60 W
110/220 V; 50/60 Hz; 60 W
Trigger output (BNC)
4 V pulse every 10 pm
4 V pulse every 10 pm
4 V pulse every 10 pm
Analog power output (BNC)
0 to 4 V linearly proportional to laser power in mW
0 to 4 V linearly proportional to laser power in mW
0 to 4 V linearly proportional to laser power in mW
Notes
1. Wavelength is calibrated as “Mean wavelength”.
2. When measured after warm-up time, measurements over 1 25+1C.
3. For output power > 0 dBm with Tuning Speed 100nm/s, repeated over 100 measurements
4. ASE is measured at 0.1 nm bandwidth and +-1 nm away from center wavelength
ORDERING INFORMATION
商品属性 [波长] 1260 to 1580 nm [功率] ≥ 10 mW