MPL300
HIGH ENERGY DPSS PICOSECOND PASSIVELY Q-SWITCHED LASER
MPL300-YLF series high pulse energy, DPSS passively Q-switched picosecond lasers are ideal choice for applications where high peak powers are needed. Diode pumped passively Q-switched single longitudinal mode (SLM) oscillator is the core of the system. Short picosecond optical pulse of 500 ps is directed to multi-pass diode pumped power amplifier for amplification to up to more than 50 mJ pulse energy. The power amplifier(s) are based on novel pump technology (VCSEL), which allows long-life system operation up to 20G shots (compared with standard LD pumping ¬- by order of magnitude longer).
Thermocontrolled harmonic generators available as standard options. Each wavelength has a separate output port. Set of extremely high-performance parameters covers many applications like surface cleaning, material analysis (LIBS), pollution monitoring and many others.
System is supplied with air or water cooling depends on repetition rate. Compact system footprint is welcome point for OEM integrators.
Laser is controlled by supplied user-friendly software via PC USB port with application for Windows™ operating system.
Features
Applications
Up to 50 mJ pulse energy at 1053 nm
Short pulse duration < 500 ps
Up to 100 Hz repetition rate
High peak power 100 MW
Air or water cooled
Excellent TEM00 and stable SLM
527 nm, 351 nm, 263 nm
Other wavelengths (1047nm, 1064 nm, 1319nm, 1338nm, 1342 nm, 1079, and its harmonic, etc.) available under request
Cleaning
Material ablation and deposition
Medical
OLED repair
Pollution Monitoring
Remote sensing
Supercontinuum Generation
LIBS
MPL300-YLF
MPL330-YLF
MPL350-YLF
Pulse energy
1053 nm
1 mJ
30 mJ
50 mJ
526.5 nm
0.5 mJ
15 mJ
25 mJ
351 nm
0.25 mJ
7 mJ
15 mJ
263 nm
0.1 mJ
3 mJ
7 mJ
Pulse energy stability (Std. Dev)
1053 nm
< 1 % 2)
526.5 nm
< 2 % 2)
351 nm
< 3.5 % 2)
263 nm
< 5% 2)
Pulse duration (FWHM)
< 500 ps 3)
Power drift
± 3 % 4)
Pulse repetition rate
10 Hz or other fixed in the range 0 – 100 Hz 5)
Polarization
vertical, > 99 % at 1064 nm
Beam profile
close to Gaussian in near and far fields
Beam divergence
< 6 mrad 6)
< 1.5 mrad 6)
< 0.7 mrad 6)
Beam propagation ratio M2
< 1.3
Beam pointing stability
≤ 20 μrad 7)
Typical beam diameter
~ 1 mm 8)
~ 5 mm 8)
~ 7 mm 8)
Optical jitter
~ 2 µs 9)
Dimensions
Laser head size (W × L × H)
113 x 163 x 46 mm
175 × 430 × 132 mm
Electrical cabinet size (W × L × H)
600 × 520 × 286 mm
440 × 420 × 286 mm
Umbilical length
2.5 m
Operating requirements
Cooling
Air or Water
Ambient temperature
15 – 30 °C
Relative humidity
10 – 80 % (non-condensing)
Mains voltage
100 – 240 VAC, single phase. 50 – 60 Hz
Power consumption
Max 100 W
1. Due to continuous improvements all specifications are subject to change. Unless stated otherwise all specifications are measured at 1053 nm.
2. Averaged from pulses, emitted during 60 sec time interval.
3. FWHM level at 1053 nm. Other pulse duration (from 300 ps to 20 ns) is available by request. Please inquire for detailed specifications.
4. Over 8-hour period after max 5 minutes of warm-up when ambient temperature variation is less than ±2 °C.
5. Factory-set pulse repetition rate is fixed at max repetition rate. Higher repetition rates are available, please inquire for details.
6. Full angle measured at the 1/e2 level.
7. RMS value measured from 1000 shots.
8. Beam diameter is measured 20 cm from laser output at the 1/e2 level.
9. In respect to Q-switch triggering rising edge pulse.
MPL300-YLF laser head dimensions:
MPL330/350 laser dimensions:
MPL330 power supply dimensions:
商品属性 [波长] 1053 nm 526.5 nm 351 nm 263 nm [脉宽] < 500 ps [重复频率] 10 Hz or other fixed in the range 0 – 100 Hz [单脉冲能量] 1053 nm 50 mJ,526.5 nm 25 mJ ,351 nm 15 mJ,263 nm 7 mJ