Reliable & Versatile Industrial Laser For Micromachining
Features
30 W typical max output power
90 µJ max pulse energy
>250 µJ in a burst mode
<350 fs – 1 ps Single shot to 4 MHz (AOM controlled)
<0.5% RMS power long term stability over 100 hours
M <1.2
Beam circularity > 0.85
Zero maintenance
Dry cooling (no water used)
PSU and cooling unit integrated into a single 4U rack housing
Easy and quick installation
Compatible with galvo and Polygon scanners as well as PSO controllers
Applications
LCD, LED, OLED drilling, cutting and repair
Microelectronics manufacturing
Glass, sapphire and ceramics micro processing
Glass intra-volume structuring
Micro-processing of difffferent polymers and metals
Innovative “Dry” Cooling System
The FemtoLux 30 laser employs an innovative cooling system and sets new reliability standards among industrial femtosecond lasers. No additional bulky and heavy water chiller is needed.
The chiller requires periodic maintenance – cooling system draining and rinsing and water and particle filter replacement. Moreover, water leakage can cause damage to the laser head and other equipment. Instead of using water for transferring heat from a laser head, the FemtoLux 30 laser uses an innovative Direct Refrigerant Cooling method. The refrigerant agent circulates from a PSU-integrated compressor and condenser, to a cooling plate via armored flexible lines. The entire cooling circuit is permanently hermetically sealed and requires no maintenance.
Simple & reliable cooling plate attachment
The cooling plate is detachable from the laser head for more convenient laser installation. The laser cooling equipment is integrated with the laser power supply unit into a single 4U rackmounted housing with a total weight of 15 kg.
The FemtoLux 30 femtosecond laser has a tunable pulse duration from <350 fs to 1 ps and can operate in a broad AOM controlled range of pulse repetition rates from a single shot to 4 MHz.
The maximum pulse energy is more than 90μJ operating with single pulses and can reach 250uJ in burst mode, ensuring higher ablation rates and processing throughput for different materials.
The FemtoLux 30 beam parameters will meet the requirements of the most demanding materials and micro-machining applications.
Innovative laser control electronics ensure simple control of the FemtoLux 30 laser by external controllers that could run on different platforms, be it Windows, Linux or others using REST API commands.
This makes easy integration and reduces the time and human resources required to integrate this laser into any laser micromachining equipment.
Seamless User Experiencev
Easy integration
Remote control using REST API commands via USB, RS232 and LAN.
Reduced integration time
Demo electronics is available for laser control programming in advance.
Easy and quick installation
No water, fully disconnected laser head. Can be installed by the end-user.
Easy troubleshooting
Integrated detectors and constant system status logging.
No periodic maintenance required
Specifications1)
1) Due to continuous improvement, all specifications are subject to change without notice. Parameters marked typical are not specifications. They are indications of typical performance and will vary with each unit we manufacture. All parameters are specified for a shortest pulse duration.
2) When frequency divider is set to transmit every pulse. Fully controllable by integrated AOM.
3) When number of pulses within a burst is set to 10 and PRR is set to a minimum value. Separation between pulses within a burst - ~20 ns.
4) Over 100 h after warm-up under constant environmental conditions.
5) Under constant environment conditions.
6) At PRR >500 kHz. At PRR <500 kHz shortest pulse duration is <400 fs.
商品属性 [波长] 1030nm [脉宽] <350fs-1ps [脉冲能量] >90uj [平均功率] >27W [重复频率] 200kHz-4MHz