Ribbon Fiber Fusion Splicer
Up to 4-fiber ribbon splicing
High speed splicing of 13 seconds
High speed heating of 14 seconds
Interchangeable V-groove system
Easy operation with touch panel and GUI
3 LED lights allow convenient loading of fibers in V-groove
Automatic Fiber offset correction function available
Wi-Fi connection allows wireless control and data management
Specifications
Applicable fibers*1
SM (ITU-T G.652 / G.657A1 / G.657A2)
MM (ITU-T G.651)
DS (ITU-T G.653)
NZD (ITU-T G.655)
BIF (ITU-T G.657.A1/A2)
Fiber Count
Up to 4-fibers
Cladding diameter
125µm
Fiber coating diameter
Single fiber
0.25mm, 0.9mm
Ribbon fiber
Refer to Fiber Holder
Fiber cleaving length
10mm
Average splice loss*2
SM : 0.05dB MM : 0.03dB
DS : 0.08dB NZD : 0.08dB BIF : 0.05dB
Typical splice time
4-fiber ribbon : 13sec.
Single fiber : 13sec.
Typical heating time
4-fiber ribbon : 14sec. (S924, power mode)
Single fiber : 13sec (S921, power mode)
Splice program
Max. 300
Heat program
Max. 100
Applicable protection
sleeve length
40mm / 60mm
Tension test
1.96N
Discharge compensation
function
Automatic correction according to temperature and atmospheric pressure
Optical fiber viewing method
Two-way observation from X and Y axes
Monitor
4.3 inch wide LCD monitor with touch screen
Magnification
56X
Splice result storage /
Image capture capacity
Last 10,000 splices /
Last 100 images to be automatically captured
Dimensions
139W x 209D x 114H mm not including shock absorber 179W x 246D x 131H mm including shock absorber
Weight
1.8kg (with battery)
Data output
USB ver.2 mini B x 1 port, Standard A x 1 port
Power source
AC : 100-240V (50/60Hz) DC : 11-24V
Battery capacity*3
170 splice and heating cycles
Operating condition
Altitude : 0-2,000m Wind protection : 15m/s
Operating temperature : -10 to +50 °C (non-condensing)
Storage condition
-40 to +60 °C (non-condensing)
*1 Corresponding to optical fiber in compliance with ITU-T recommendation.
*2 This numerical number is the one when measured for the purpose to show the fusion splice characteristics in the testing method of IEC 61073-1,
it is not the one to guarantee the splicing loss.
*3 Number of times that the fusion splicing of the fiber and the heat reinforcement can be performed continuously at a rate of once a 90seconds at the room temperature (20°C) condition when using a new 100% charged battery. The number of times you can use depends on the state of the battery and usage.
Environmental Durability
Drop impact
Vertical drop test (5sides excluding the top side) is conducted from a height of 76cm and the normal operation is confirmed.
Impact
protection
The normal operation is confirmed after dropping a 500grams weight of IK 07 grade from the height of 40cm onto the equipment.
Dustproof
The normal operation is confirmed after putting the equipment in a device containing dust of 25μm or less for 8hours.
Drip proof
The normal operation is confirmed after exposing water droplet of IPX 2 grade with 3mm/min to 4sides for 2.5min or more tilted by 15degree.
* It is not the guarantee of no break or no failure of this product since the test is performed with the draft shield closed.
Standard Package
Item Model No. S124M4-3-0
(Q'ty)
S124M4-3-1
(Q'ty)
S124M4 main body S124M4-X-A-0001 1 1 Hard carrying case
HCC-11
1
1
Battery pack
S947
1
1
Spare electrode
ELR-01
1 pair
1 pair
AC adapter
S979
1
1
AC power cord
----
1
1
Cooling tray
CTX-03
1
1
Fiber reformer (4 fiber)
FRF-01
1 pair
1 pair
Cleaning brush
VGC-01
1
1
Electrode sharpener
D5111
1
1
Tool case
TCC-01
1
1
LCD antireflectifve sheet
ARS-01
1
1
Rubber foot
RBC-01
1 pair
1 pair
Quick Reference guide
FTS-B559
1
1
Instruction manual
UMC-03
1
1
Wi-Fi dongle
WFD-01
0
1
Optional components
Item
Model No. Soft carrying case
SCC-01 Battery Charger
S980
Angled Stand
AGS-02
Strap plate
SPL-01
Work belt
WBT-01
USB cable
USB-01
Car cigarettes cable
CDC-04
Fiber holder
Item Model No. Fiber holder ( 0.25mm coating fiber )
S712S-250
Fiber holder ( 0.90mm coating fiber )
S712S-900
Fiber holder ( 2 fiber ribbon )
S712A-002
Fiber holder ( 4 fiber ribbon )
S712A-004
Fiber Guide V-groove
Fbier count, pitch
Model No.
0.25mm pitch
4 fiber
FGV-04-P250
Protection Sleeve
Model No. Applicable Fiber Length S921 Single fiber, 0.25 - 0.9mm coating dia.
60mm S922
Single fiber, 0.25 - 0.9mm coating dia.
40mm
S924
Single fiber and upto 8-fiber ribbon
40mm
描述 [描述] Up to 4-fiber ribbon splicing