Ribbon Fiber Fusion Splicer
Up to 16-fiber 200 µm ribbon splicing
Interchangeable V-groove system
Suited for 250 µm and 200 µn pitch 12-fiber ribbons
Easy operation with touch panel and GUI
3 LED light allow convenient loading of fiber in V-groove
Wi-Fi Connection allows wireless control and data management
Specifications
Applicable fibers*1
SM (ITU-T G.652.B/D)
MM (ITU-T G.651)
DS (ITU-T G.653)
NZD (ITU-T G.655)
BIF (ITU-T G.657.A1/A2)
Fiber Count
Up to 16-fibers
Cladding diameter
125 µm
Fiber coating diameter
Single fiber
0.25 mm, 0.9 mm
Ribbon fiber
200 µm, 250 µm (refer to fiber holder)
Fiber cleaving length
10 mm
Average splice loss*2
SM : 0.05 dB MM : 0.03 dB
DS : 0.08 dB NZD : 0.08 dB BIF : 0.05 dB
Typical splice time
16-fiber ribbon : 23 sec.
12-fiber ribbon : 15 sec.
Single fiber : 13 sec.
Typical heating time
16-fiber ribbon : 28 sec. (S927R, power mode)
12-fiber ribbon : 28 sec. (S927R, power mode)
Single fiber : 13 sec. (S921, power mode)
Splice program
Max. 300
Heat program
Max. 100
Applicable protection
sleeve length
40 mm / 60 mm
Tension test
1.96 N
Discharge compensation function
Automatic correction according to temperature and atmospheric pressure
Optical fiber viewing method
Two-way observation from X and Y axes
Monitor
4.3 inch wide LCD monitor with touch screen
Magnification
16X, 20X (in zooming), 28X (in zooming), 56X (in zooming)
Splice result storage /
Image capture capacity
Last 10,000 splices /
Last 100 images to be automatically captured
Dimensions
139W x 209D x 114H mm not including shock absorber 179W x 246D x 131H mm including shock absorber
Weight
1.8 kg (with battery)
Data output
USB ver.2 mini B x 1 port, Standard A x 1 port
Power source
AC : 100-240 V (50/60 Hz) DC : 11-24 V
Battery capacity*3
170 splice and heating cycles
Operating condition
Altitude : 0-2,000 m (1-12-fibers), 0-1,000 m (16-fibers)
Wind protection : 15 m/s
Operating temperature : -10 to +50°C (non-condensing)
Storage condition
-40 to +60 °C (non-condensing)
*1 Corresponding to optical fiber in compliance with ITU-T recommendation.
*2 This numerical number is the one when measured for the purpose to show the fusion splice characteristics in the testing method of IEC 61073-1, it is not the one to guarantee the splicing loss.
*3 Number of times that the fusion splicing of the fiber and the heat reinforcement can be performed continuously at a rate of once a 90 seconds at the room temperature (20°C) condition when using a new 100% charged battery. The number of times you can use depends on the state of the battery and usage.
Environmental Durability
Drop impact
Vertical drop test (5 sides excluding the top side) is conducted from a height of 76 cm and the normal operation is confirmed.
Impact
protection
The normal operation is confirmed after dropping a 500 grams weight of IK 07 grade from the height of 40 cm onto the equipment.
Dustproof
The normal operation is confirmed after putting the equipment in a device containing dust of 25 μm or less for 8 hours.
Drip proof
The normal operation is confirmed after exposing water droplet of IPX 2 grade with 3 mm/min to 4 sides for 2.5 min or more tilted by 15 degree.
* It is not the guarantee of no break or no failure of this product since the test is performed with the draft shield closed.
Standard Package
Item Model No. S124M16-30
(Q'ty)
S124M16-31
(Q'ty)
S124M16 main body
S124M16-X-A-0001
1 1 Hard carrying case
HCC-11
1
1
Battery pack
S947
1
1
12-fiber Fiber Guide
FVG-12-P250
1
1
Spare electrode
ELR-01
1 pair
1 pair
AC adapter
S979
1
1
AC power cord
----
1
1
Cooling tray
CTX-03
1
1
Fiber reformer (4 fiber)
FRF-01
1 pair
1 pair
Fiber reformer (8/12 fiber)
FRF-02
1 pair
1 pair
Cleaning brush
VGC-01
1
1
Electrode sharpener
D5111
1
1
Tool case
TCC-01
1
1
LCD antireflective sheet
ARS-01
1
1
Rubber foot
RBC-01
1 pair
1 pair
Quick Reference guide
FTS-B559
1
1
Instruction manual
UMC-03
1
1
Wi-Fi dongle
WFD-01
0
1
Optional components
Item Model No. Soft carrying case
SCC-01 Battery Charger
S980
Angled Stand
AGS-02
Strap plate
SPL-01
Work belt
WBT-01
USB cable
USB-01
Car cigarettes cable
CDC-04
Fiber holder
Item Model No. Fiber holder ( 0.25 mm coating fiber )
S712S-250
Fiber holder ( 0.90 mm coating fiber )
S712S-900
Fiber holder ( 2 fiber ribbon )
S712A-002
Fiber holder ( 4 fiber ribbon )
S712A-004
Fiber holder ( 6 fiber ribbon )
S712A-006
Fiber holder ( 8 fiber ribbon )
S712A-008
Fiber holder ( 12 fiber ribbon )
S712A-012
Fiber holder ( 12 fiber rollable ribbon )
S712A-12e
Fiber holder ( 12 fiber rollable ribbon, 200 µm fiber coating )
S712A-12e-P200
Fiber holder ( 16 fiber rollable ribbon, 200 µm fiber coating )
S712A-16e-P200
Fiber Guide V-groove
Fiber count, pitch Model No. 0.25mm pitch 4 fiber FVG-04-P250 8 fiber FVG-08-P250
12 fiber FVG-12-P250
0.2mm pitch
12 fiber
FVG-12-P200
16 fiber
FVG-16-P200
Protection Sleeve
Model No. Applicable Fiber Length S921
Single fiber, 0.25 - 0.9 mm coating dia.
60 mm
S922
Single fiber, 0.25 - 0.9 mm coating dia.
40 mm
S924
Single fiber and upto 8-fiber ribbon
40 mm
S924F
12-fiber ribbon (Flat ribbon)
40 mm
S927R
12-fiber ribbon (Rollable ribbon)
16-fiber ribbon (Rollable ribbon)
40 mm
描述 [描述] Up to 16-fiber 200 µm ribbon splicing