DR-DG-10-MO
12.5 Gbps NRZ Medium Output Voltage Driver Module
The DR-DG-10-MO is a driver module specially designed for 10 Gbps / 12.5 Gbps data transmission with NRZ format. It exhibits a 20 dB gain and can deliver an output signal up to 8 Vpp.
The DR-DG-10-MO is a key component to obtain high quality 12.5 Gbps eye diagrams with high SNR, low jitter and short rise and fall time. It operates from a single power supply for safety and ease of use, and offers gain control over 3 dB. It comes with SMA type RF connectors (female in, male out) and with an optional heat-sink.
FEATURES
• Output voltage 8 Vpp
• High SNR > 25
• Flat gain up to 8 GHz
• Single voltage power supply
APPLICATIONS
• LiNbO3 modulators
• 12.5 Gbps NRZ
• OC-192 SONET / SDH
• Research & Development
OPTIONS
• Heat-sink
• Alternative RF connectors
• High output voltage version (12 Vpp)
• High bandwith version (15 GHz)
Performance Highlights
Parameter
Min
Typ
Max
Unit
Cut-off Frequencies
50 k
-
8 G
Hz
Output voltage
-
-
8
Vpp
Gain
-
20
-
dB
Added Jitter
-
900
-
fs
Rise / Fall Times
-
22
-
ps
10 Gbps Output Response
DC Electrical Characteristics
Electrical Characteristics
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect device reliability
Eye Diagrams
Eye Diagrams
Electrical Schematic Diagram
Mechanical Diagram and Pinout
All measurements in mm
The heat-sinking of the module is necessary. It’s user responsability to use an adequate heat-sink. R