SPECIM FX10
IMPROVE ACCURACY AND REDUCE COSTS
Specim FX10 camera series is designed for industrial and laboratory use. Specim FX10 cameras work in a line-scan mode in the visible and near-infrared (VNIR) area; Specim FX10 in the 400-1000 nm region, and the color optimized Specim FX10c camera in the 400-780 nm region.
Specim FX10 cameras are best suited for:
• Vegetation & agriculture
• Phenotyping
• Color & density in printing
• Display & light source inspection
• Food quality
FEATURES
• Spectral range of 400-1000 / 400-780 nm
• High spatial resolution of 1024 pixels
• High image speed of 327 FPS (full range)
• Free wavelength selection from 224 bands within the camera coverage
• Built-in image correction
• Unified spectral calibration between units
• GigE or CameraLink standard interfaces
• Easy mounting to industrial environment
SPECTRAL RESPONSE
DIMENSIONS
Spectral Range
400-1000 / 400-780 (c-version)
Spectral resolution (FWHM)
5.5 nm (mean)
Spectral sampling/pixel
2.7 nm
With default binning
Spectral bands
224 / 140 (c-version)
With default binning
Numerical aperture
1.7
With default lens
Optics magnification
0.80
Effective pixel size
19.9x9.97 μm
At fore lens image plane
Effective slit width
42 μm
At fore lens image plane
Effective slit length
10.2 mm
At fore lens image plane
SNR @ max. signal
420 : 1
Spatial samples
1024
Bit depth
12
Maximum frame rate
327 FPS full range / 514 FPS full range (c-version)
Binning
2,4,8 spectral and spatial
Default: 2 spectral x 1 spatial
ROI
Freely selectable multiple bands of interest
Minimum height of ROI is two 1-binned rows.
Maximum frame rate is determined by the total
number of rows included in the mMROI’s
Pixel operability
99.993%
Image corrections
Non uniformity correction
Bad pixel replacement
Automatic Image Enhancement (AIE)
One point NUC
AIE: Unified spectral calibration + corrected smile
and keystone aberrations
Sensor material
CMOS
Sensor cooling
Passive
Full well capacity
90 ke-
Read-out modes
IWR / ITR
Optics temperature
Passive
Lens mount
Custom mount
Fore lens FOV options
12 deg
38 deg (default)
47 deg
51 deg
83 deg
Only the default lens is specifically designed for FX10.
With other lens options, optical parameters may vary.
Camera digital data output/control interface
GigE Vision, CameraLink
Camera control protocols
GenICam, ASCII
Power input
12 V DC (+-10%)
Power consumption
Max 4 W
Connectors
Industrial Ethernet OR CameraLink 26-pin, 0.5” MDR
IP
IP52
Dimensions (L x W x H)
150 x 85 x 71 mm
Mounting surface option on three sides.
Mounting kit adds 24 mm distance on mounting side.
Weight
1.3 kg
Storage temperature
-20 ... +50°C (non-condensing)
Operating temperature
+5 … +40°C (non-condensing)
Relative humidity
5% – 95% (non-condensing)
商品属性 [光谱范围] 400-1000 / 400-780 (c-version) [光谱FWHM] 5.5 nm (mean)