PIXIS-XO Soft X-Ray Cameras
The PIXIS-XO series of fully integrated imaging cameras utilizes back-illuminated and back-illuminated deep depletion CCDs without AR coating, for direct detection of the widest range of X-rays between ~ 30 eV and 20 keV (AR coated devices are not useful for X-ray energies < 500 eV). With a 1024 x 1024 imaging array, 13 µm pixels, 100% fill factor, low noise electronics and -70° C thermoelectric cooling with either air or water, this system is ideal for worry-free operation in research and OEM environments. The rotatable conflat flange with high-vacuum-seal design, software selectable gains and readout speeds make these cameras well suited for ultra-high vacuum applications.
FEATURES
BENEFITS
Back-illuminated deep depletion and Back-illuminated
Provides high sensitivity, high resolution imaging of very low flux X-rays from
CCD, with no AR coating
~ 30 eV to 20 keV
2 Mhz / 16-bit readout
100 kHz / 16-bit readout
High speed readout for rapid image acquisition; Slow speed readout for high sensitivity
with wide dynamic range, high signal-to-noise ratio (SNR) and excellent energy resolution
Software selectable gains for each digitization speed
Allows optimization of system performance for lowest noise to highest SNR
1024 x 1024 image area,
13 x 13 µm pixels
Imaging format designed for high frame rate imaging
Ultra low noise electronics
Best possible system performance
Flexible user-selectable binning & readout
Total flexibility to optimize experiments and SNR
Kinetics
Custom readout mode offers microsecond resolution
Deep, thermoelectric air cooling
Maintenance-free operation - No need for a liquid circulator or additional power supply
Deep, thermoelectric water cooling
Vibration-free operation
Conflat vacuum interface
Industry-standard, high-vacuum compatibility
TTL input and output
External Trigger input with programmable polarity;
TTL output with exposure or readout monitor
USB 2.0 interface
Seamless, plug-and-play connection to PC notebooks & desktops; Easy OEM integration
WinView/Spec software (for Windows 8/7/XP; 32-bit)
or LightField® (for Windows 8/7; 64-bit)
Powerful, yet easy-to-use software packages for acquisition, display and analysis;
Powerful yet intuitive interface; Direct stream to hard drive
PVCAM/PICAM interface
Universal programming interface for easy custom programming; Compatible with
Windows 8/7/XP (32-bit), Windows 8/ 7 (64-bit) and Linux; PICAM for Windows 7
(64-bit)
LabView® Scientific Imaging ToolKit (SITKTM)
Predefined VIs for easy integration of camera controls into large experiment
SPECIFICATIONS
PIXIS-XO: 1024B
PIXIS-XO: 1024BR
Features
Back-illuminated CCD without AR coating, for
sensitivity between ~30 eV to 10 keV
Back-illuminated, deep depletion CCD without AR
coating, for sensitivity for widest range of X-ray
detection between ~ 30eV to 20 keV.
CCD Image Sensor
e2v CCD47-10; scientific grade 1; MPP;
back-illuminated; no AR coating
e2v CCD47-10; scientific grade 1; NIMO;
back-illuminated deep depletion; no AR coating
Dark current @ -70° C
(with ambient air @ +20° C)
0.0004 e-/p/sec (typical)
0.001 e-/p/sec (max)
0.02 e-/p/sec (typical)
0.07 e-/p/sec (max)
CCD format
1024 x 1024 imaging pixels; 13 x 13 mm pixels; 100% fill factor; 13.3 x 13.3 mm (optically centered)
Deepest cooling temperature,
TE air cooling1
(with ambient air @ +20° C)
-70° C typical; -65° C guaranteed
Thermostating precision
±0.05° C
Cooling method
Thermoelectric air or liquid cooling (CoolCUBE II required)
Full well
Single pixel: 100 ke- (typical), 60 ke- (minimum)
Output node: 250 ke- (typical), 220 ke- (minimum)
ADC speed/bits
100 kHz/16-bit and 2 MHz/16-bit
System read noise @100 kHz
@2 MHz
3.1 e- rms (typical), 5 e- rms (max)
9 e- rms (typical), 15 e- rms (max)
Vertical shift speed
< 3.2 msec/row to18 msec/row (programmable)
Non-linearity
<1% @ 100 kHz
Software selectable gains
1, 2, 4 e-/ADU; available at all speeds
Operating systems supported
Windows 8/7/XP; Linux
Data interface
USB2.0 (5m interface cable provided); Optional Fiberoptic interface is available for remote operation
I/O signals
Two MCX connectors for programmable frame readout, shutter, trigger in
Operating environment
+5° C to +30° C non-condensing
Bakeout temperature
70° C (maximum)
Vacuum Compatibility
10 -8 Torr
Certification
CE
Dimensions / Weight
16.59 cm (6.53") x 11.81 cm (4.65") x 11.38 cm (4.48") (L x W x H) /
2.27 kg (5 lbs)
NOTES: All specifications subject to change
1. The minimum temperature attainable is dependent on the vacuum condition - temp can be lowered w/lower vacuum
Readout Rates
Binning
@ 2 MHz
@100 kHz
1 x 1
583 msec
10.05 sec
2 x 2
282.3 msec
2.8 sec
4 x 4
138.4 msec
0.85 sec
Quantum Efficiency Curve
4.5" Conflat
6" Conflat
商品属性 [CCD Image Sensor] e2v CCD47-10; scientific grade 1; NIMO; back-illuminated deep depletion; no AR coating [CCD format] 1024 x 1024 imaging pixels; 13 x 13 mm pixels; 100% fill factor; [Dark current] 0.02 e-/p/sec (typical) 0.07 e-/p/sec (max) [Imaging area] 13.3 x 13.3 mm (optically centered)