PIXIS-XF Indirect Detection
The PIXIS-XF: 1024 series of fully integrated, low noise cameras utilizes front illuminated and back illuminated CCDs, and is designed for indirect imaging X-rays using specially designed phosphor screens and other lambertian sources.
The unique camera design, with a fiberoptic faceplate extended outside the vacuum, offers outstanding flexibility for optimizing system performance at any X-ray energy. Dual speed operation at 100 kHz or 2 MHz enables the camera to be used for steady state as well as high speed applications, while its 1024 x 1024 imaging array, 13.0 µm pixels(38 lp/mm), 100% fill factor, 1:1 fiberoptic ratio, ultra low-noise electronics, -35° C thermoelectric cooling with air or water, and its compact design make the PIXIS-XF ideal for worry-free operation in research and OEM environments.
FEATURES
BENEFITS
Back Illuminated CCD (1024B)
For highest sensitivity
Front illuminated CCD (1024F)
Affordable technology for moderate light level applications
Ultra low noise electronics
Best possible system performance for low light level applications
1:1 fiberoptic ratio*
Distortion and vignetting-free optical coupling
Deep thermoelectric air cooling
Low dark noise allows detection of faint signals; Maintenance-free operation;
NO need for a liquid circulator or additional power supply
Deep thermoelectric water cooling
CoolCUBE II, a compact room temperature coolant circulator, is available for vibration
sensitive environments
Custom phosphors*
Gd2O2S:Tb; Available for 8 keV and 17 keV; Resolution of 60 to 80 mm
Emission wavelength ~550 nm
1024 x 1024 imaging array, 13 x 13 µm pixels
Highest spatial resolution
Dual digitizers
Dual-speed digitization allows complete freedom to select between “slow operation”
for low noise and highest SNR or “fast operation” for rapid image acquisition
Software selectable gains for each digitization speed
Allows optimization of system performance for lowest noise to highest SNR
Flexible user-selectable binning & readout
Total flexibility to optimize experiments and SNR
Flexible ROI/binning
Allows faster frame rate and/or sensitivity
USB 2.0 data interface
Optional fiber optic interface
Seamless, plug-and-play connection to PC notebooks & desktops;
Easy OEM integration; Ideal for remote operation
Optional: LightField® for 64-bit Windows 7
Offers intuitive, cutting edge user interface;
Provides data acquisition, defect correction, display and analysis
Optional: WinView and WinSpec for
32-bit Windows XP/7
Offers powerful, easy-to-use set of Windows GUI controls;
Automates data acquisition, background and flat field corrections and display
SITK™ for LabVIEW™
Easy integration into complex experimental setup
PICAM (64-bit)/PVCAM (32-bit) software development
kits (SDKs)
Universal programming interfaces for easy custom programming;
Compatible with Windows XP/7 (32-bit) and Windows 7 (64-bit)
* Contact your local sales representative for information about
additional fiber optics, fiber ratios and phosphors
SPECIFICATIONS
PIXIS-XF: 1024F
PIXIS-XF: 1024B
Features
Front-illuminated CCD for
moderate light level applications
Back-illuminated CCD for
low light level applications.
CCD Image Sensor
e2v CCD47-10; front-illuminated;
scientific grade 1; AIMO
e2v CCD47-10; back-illuminated;
scientific grade 1; AIMO
Dark current @ -40° C
0.035 e-/p/sec (typical)
0.2 e-/p/sec (max)
0.035 e-/p/sec (typical)
0.2 e-/p/sec (max)
CCD format
1024 x 1024 imaging pixels; 13 x 13-mm pixels; 100% fill factor; 13.3 x 13.3 mm (optically centered)
Deepest cooling temperature
(with ambient air @ +20° C)
-40° C typical; -35° C guaranteed
Thermostating precision
±0.05° C
Cooling method
Thermoelectric air (standard) or liquid cooling (CoolCUBE II required)
Full well
Single pixel: 100 ke- (typical), 60 ke- (minimum)
Output node: 250 ke- (typical), 200 ke- (minimum)
ADC speed/bits
100 kHz/16-bit and 2 MHz/16-bit
System read noise@100kHz
@2MHz
4.5 e- rms (typical), 6.5 e- rms (max)
12.5 e- rms (typical), 16 e- rms (max)
Vertical shift speed
< 3.2 µsec/row to 18 µsec/row (programmable)
Non-linearity
< 1% @ 100 kHz
Software selectable gains
1, 2, 4 e-/ADU; available at all speeds
Operating systems supported
Windows XP/Vista/7; Linux
Data interface
USB2.0 (5m interface cable provided); Optional Fiberoptic interface is available for remote operation
I/O signals
Two MCX connectors for programmable frame readout, shutter, trigger in
Operating environment
+5° C to +30° C non-condensing
Certification
CE
Dimensions / Weight
19.8 cm (7.80") x 11.81 cm (4.65") x 11.38 cm (4.48") (L x W x H) / 2.55 kg (5.65 lbs)
Readout Rates
NOTES: All specifications subject to change
Binning
@ 2 MHz
@100 kHz
1 x 1
0.58 sec
10.0 sec
2 x 2
0.28 sec
2.8 sec
4 x 4
0.14 sec
0.85 sec
Quantum Efficiency Curve
Without Phosphor Kit
With Phosphor Kit
商品属性 [CCD Image Sensor] e2v CCD47-10; front-illuminated; scientific grade 1; AIMO [CCD format] 1024 x 1024 imaging pixels; 13 x 13-mm pixels; 100% fill factor; [Dark current] 0.035 e-/p/sec (typical) 0.2 e-/p/sec (max) [Imaging area] 13.3 x 13.3 mm (optically centered)