Cobolt RogueTM Series
High Power | CW Diode pumped lasers
Applications
Widefield fluorescence microscopy
Flow cytometery
Super-resolution microscopy
DNA sequencing
High content analysis
• 640 nm
• CW output power up to 1 W
• Spectral bandwidth < 150 GHz (200 pm)
• Perfect TEM00 beam
• Stable output power < 2 % peak-to-peak over 8 hours
• Ultra-robust, hermetically sealed packages
Cobolt RogueTM Series lasers are continuous-wave diode pumped lasers (DPL) operating at a fixed wavelength. The lasers are built using proprietary HTCure™ manufacturing technology for ultra-robustness in a compact hermetically sealed package.
As a complement to our Cobolt 05-01 Series of single frequency lasers, the Cobolt RogueTM Series lasers have higher optical power and a spectral bandwidth of < 150 GHz. The lasers emit a very high quality laser beam with stable characteristics over a wide range of operating conditions, they are designed and manufactured to ensure a high level of reliability.
The Cobolt RogueTM iE is a fully integrated laser device, including all control electronics. The Cobolt RogueTM iE eliminates the need for an external controller, bringing the trusted laser performance of Cobolt RogueTM Series into a compact, self-contained device.
Cobolt RogueTM Series lasers are intended for stand-alone use in laboratory environments or for integration as OEM components in instruments for applications including fluorescence microscopy, flow cytometry, DNA sequencing and High content analysis.
Performance Specifications
Center wavelength
639.6 ± 0.3 nm
Available Power Levels
1.0 W
Noise, 20 Hz - 20 MHz (rms)
< 0.5 %
Power stability (8 hrs ± 3°C)
< 2%
Beam divergence (full angle)
< 1.4 mrad
Spatial mode (TEM00)
M2 < 1.1
Beam diameter at aperture
700 ± 50 µm
Spectral bandwidth (FWHM)
< 150 GHz (200 pm)
Beam symmetry at aperture
> 0.90:1
Beam pointing stability (over 10-40°C)
< 10 µrad/°C
Polarization ratio (linear, vertical)
> 100:1
Warranty
12 months, unlimited hours
Operational Environment
RogueTM
RogueTM iE
Power supply requirements
15 VDC, 6 A
12 VDC, 6.7 A
System power consumption
< 65 W, typical 30W
Maximum laser head baseplate temperature
45 °C
45 °C
Ambient temperature, operation
10 - 35 °C
10 - 35 °C
Laser head heat sink thermal impedance (at max ambient temperature)
< 0.18 K/W
< 0.15 K/W
Ambient temperature, storage
-10 -> +60 ºC
Humidity
0- 60 % RH non-condensing
Ambient air pressure
950 - 1050 mbar
Communication Interface
Communication USB or RS-232 Standard Baudrate 115200
Electrical Interfaces
Options and Accessories• C-FLEX Laser combiner
• Laser head heatsink with fans for Cobolt RogueTM lasers : HS-04
• Laser head heatsink with fans for Cobolt RogueTM iE lasers : HS-05
• TEC Plate for active baseplate temperature control
• Heatsink with fiber coupling for Cobolt RogueTM lasers : FIC-04
商品属性 [波长] 639.6 ± 0.3 nm [功率] 1 W