465/30 nm BrightLine® single-band bandpass filter
Part Number: FF01-465/30-25
Your filter spectrum may differ slightly from the typical spectrum above, but is certified to meet the optical specifications noted below.
465/30 nm BrightLine® single-band bandpass filter
Individual fluorescence bandpass filters that have been optimized for use in a variety of fluorescence instruments. All thin-film, hard-
coated construction for unsurpassed performance and reliability.
Part Number
Size
FF01-465/30-25
25 mm x 5.0 mm
Optical Specifications
Specification
Value
Transmission Band 1
Tavg > 90% 450 – 480 nm
Center Wavelength 1
465 nm
Guaranteed Minimum Bandwidth 1
30 nm
FWHM Bandwidth 1 (nominal)
34.8 nm
Blocking Band 1
Nominal blocking data is represented by the ASCII spectrum
General Filter Specifications
Specification
Value
Angle of Incidence
0 ± 5 degrees
Cone Half-angle
7 degrees
Optical Damage Rating
Testing has proven to show no signs of degradation when exposed to at least 6.0 W of power from an unfiltered
xenon arc lamp over a 25 mm diameter (corresponding to 1.2 W/cm2) for over 500 hrs.
Filter Effective Index
1.93 Understanding ‘Effective Index of Refraction’ neff
Physical Filter Specifications (applies to standard sized parts; contact us regarding other sizes)
Specification
Value
Transverse Dimensions (Diameter)
25 mm
Transverse Tolerance (mounted)
+ 0.0 / – 0.1 mm
Filter Thickness (Mounted)
5.0 mm
Filter Thickness Tolerance (Mounted)
± 0.1 mm
Clear Aperture
≥ 21 mm
Scratch-Dig
60-40
Substrate Thickness (unmounted)
3.5 mm
Substrate Thickness Tolerance (unmounted)
± 0.1 mm
Orientation
Arrow on ring indicates preferred direction of propagation of light
商品属性 [通频带] Tavg > 90% 450 – 480 nm [中心波长] 465nm [尺寸] 25 mm x 5.0 mm [FWHM] 34.8 nm