MODEL NUMBER:MHPXXX-YYADM-A1
(Formerly 31XXX-YYADM)
The MHPXXX-YYADM-A1 driver is a RF driver module with analog and digital modulation input and up to 20 watts output into a 50 ohm load.
PARAMETER
SPECIFICATION
Output Frequency:(XXX)
24 MHz to 260 MHz
+ 0.01% quartz stabilized
Spurious Levels:
-40 dBc maximum
Harmonic Distortion:
-15 dBc maximum
Analog Input:
0-1volt into 50 ohms
1 volt = full RF power
0 = RF power off
Digital Input:
TTL levels (pulled high internally via 4.7k ohms)
TTL high = full RF power
TTL low = minimum RF power
Extinction Ratio:
40 dB Minimum
RF Rise / Fall Time
30 ns maximum, 20 ns typical, 10 ns > 210 MHz
P RF : 10 to 90%
RF Output Power: (YY)
2 to 20 watts nominal,maximum output power set by internal pot.
Output Impedance:
50 ohms nominal
Supply Voltage:
+ 24 volts DC + 0.5 volts
Supply Current:
3 amps maximum
Air flow across heat sink
18 CFM @ 25℃
MAXIMUM RATINGS:
Supply Voltage:
+28 volts DC
Power Output:
No DC feedback allowed
Case Temperature:
+ 55 0 C
CONNECTORS & MECHANICAL:
RF Output Connector:
SMA female
Modulation Input Connector:
Feed through pin
Power Supply Connections:
Vcc Feed through pin
Return Feed through pin
Physical Body Size:
5.43" L x 2.42" H x 3.90" W
RELATED DOCUMENTS
Outline Drawing:
53D1597
商品属性 [操作频率] 24 - 260 MHz [最大射频功率] 2-20 W [兼容的声光设备] Fiber-Q,Modulator